Products 1-11 of 11
Show
Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: COM-09181 -
Sparkfun
It's the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life...
It's the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted to a low profile button by removing the middle ring. Features: LED indicator light runs at 12VDC
Bulb holder is easy to install or remove
3 Terminals Button Actuator microswitch included
Microswitch reliability tested to 10,000,000...
Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: COM-08033 -
Sparkfun
This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the...
This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to reduce the deflection of the pad. Now with footprints for diodes! Use the super cheap 1N4148 through-hole diodes. These can be used to isolate the switches to make for a bit easier decoding. Documents: Schematic
Eagle Files
Hookup Guide
Datasheet...
Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: COM-09341 -
Sparkfun
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, 'clicky' feel. Features:...
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, 'clicky' feel. Features: Concave plunger design
Durable nylon material
Microswitch: max 3A @ 120 VAC
Microswitch reliability tested to 10,000,000 cycles
Includes 3 terminal microswitch
Net weight: 25g* Cap diameter: 35mm
Overall height: 65mm
Mounting hole: 1 1/8th inch paddle bit (1.125" / 28mm) ...
Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: COM-09336 -
Sparkfun
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, 'clicky' feel. Features:...
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, 'clicky' feel. Features: Concave plunger design
Durable nylon material
Microswitch: max 3A @ 120 VAC
Microswitch reliability tested to 10,000,000 cycles
Includes 3 terminal microswitch
Net weight: 25g* Bezel diameter: 32mm
Overall height: 65mm
Mounting hole: 1 1/8th inch paddle bit (1.125" / 28mm) ...
Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: COM-09338 -
Sparkfun
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, 'clicky' feel. Features:...
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, 'clicky' feel. Features: Concave plunger design
Durable nylon material
Microswitch: max 3A @ 120 VAC
Microswitch reliability tested to 10,000,000 cycles
Includes 3 terminal microswitch
Net weight: 25g* Cap diameter: 35mm
Overall height: 65mm
Mounting hole: 1 1/8th inch paddle bit (1.125" / 28mm) ...
Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: COM-10443 -
Sparkfun
This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button, but it lights up blue! So now you can get visual feedback, or light up your project. These...
This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button, but it lights up blue! So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for 50mA. They don't easily fit into a breadboard, but check below for a breakout board. We also have these in a a variety of colors, check below to see the others. Documents: Datasheet
Drawing ...
Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: COM-10440 -
Sparkfun
This is a simple LED-illuminated tactile button with a green cap. It's just like a basic tactile button, but it lights up green! So now you can get visual feedback, or light up your project. These...
This is a simple LED-illuminated tactile button with a green cap. It's just like a basic tactile button, but it lights up green! So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for 50mA. They don't easily fit into a breadboard, but check below for a breakout board. We also have these in a a variety of colors, check below to see the others. Documents: Datasheet
Drawing ...
Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: COM-10442 -
Sparkfun
This is a simple LED-illuminated tactile button with a red cap. It's just like a basic tactile button, but it lights up red! So now you can get visual feedback, or light up your project. These have...
This is a simple LED-illuminated tactile button with a red cap. It's just like a basic tactile button, but it lights up red! So now you can get visual feedback, or light up your project. These have a 12mm body and are rated for 50mA. They don't easily fit into a breadboard, but check below for a breakout board. We also have these in a a variety of colors, check below to see the others. Documents: Datasheet
Drawing ...
Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: COM-08720 -
Sparkfun
Miniature surface mount momentary button. These are great, low-profile momentary switches. Perfect as a tactile reset switch. Rated up to 50mA. Documents: Dimensional Drawing ...
Miniature surface mount momentary button. These are great, low-profile momentary switches. Perfect as a tactile reset switch. Rated up to 50mA. Documents: Dimensional Drawing
Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: COM-09190 -
Sparkfun
This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it 'clicks' really well). This button is great for user input on a PCB or a good,...
This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it 'clicks' really well). This button is great for user input on a PCB or a good, big reset button on a breadboard. Breadboard friendly!
Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: PRT-14460 -
Sparkfun
This is a simple 4-pack of momentary, multicolor buttons, great for all sorts of projects! Unlike previous iterations of multicolor buttons, this pack's tactile switches are actually recessed into...
This is a simple 4-pack of momentary, multicolor buttons, great for all sorts of projects! Unlike previous iterations of multicolor buttons, this pack's tactile switches are actually recessed into the housing so they don't accidentally fall off during use. Each pack comes with one red button, one blue button, one yellow button and one green button. These are the same buttons included in the SparkFun Inventor's Kit v4.0. We loved them so much we had to include them in our favorite kit!...