SUNLU FilaDryer E2

Item #: SUN-DRY-E2

There are no reviews yet Write a review

Price: $629.00 inc GST

Retail Price: ##RETAILPRICE## inc GST

Was $720.00

Points to Purchase:4194

You Save: $91.00 (12.6%)

notify me

Estimate Shipping

Quantity:

About This Item

All-in-One Drying and Annealing: Combines high-efficiency filament drying and annealing in a single device. Reaches up to 110°C for optimal material performance.
Engineered for Engineering Materials: Supports 99.99% of engineering filaments such as ABS, PC, PA-CF, and more. Enhances toughness, impact resistance, and durability.
Fast Heating and Airtight Design: 500W PTC heater reaches 70°C in 30 minutes. Dual-chamber insulation and silicone seals ensure consistent, moisture-free conditions.
Spacious and Compatible: Fits up to 3KG spools. Supports 1.75mm and 2.85mm filaments. Includes preset settings for easy use across most materials and brands.

Description

Featured

SUNLU FilaDryer E2

SUNLU FILADRYER

SUNLU FilaDryer E2

Excellent Airtightness, Super Insulation Effect

Up to 110°C, it can anneal 99.99% of engineering materials on the market, allowing the materials to fulfill their potential and giving your model excellent properties such as extraordinary impact resistance and toughness. Suitable for such as ABS, ABS-CF, ASA, PC, flame retardant PC, PC-ABS, PC-PBT, CoPA, PA6-GF, PA6-CF, PA12-CF, PA612-CF, PA12 etc.

500W PTC ultra-high heating power makes your creation a step faster. It takes only 20 minutes to heat up to 50℃ at room temperature and 30 minutes to heat up to 70℃! Temperature can reach up to 110℃ (high temperature drying needs to take into account the temperature resistance of the filament spool)

EXTRA LARGE

Extra Large Interior Space, Super Adaptability

Improve Material Properties with Annealing

The maximum compatible spool size is Φ250mm*153mm, which is suitable for most of the regular spools on the market. Tested, it can hold 2 reels of regular 1KG spools, 2 reel of regular 2KG spools or 1 reel of regular 3KG spools. (Note that the test spools are SUNLU spools, other brands of spools will have slight differences, but basically compatible, when using the need to pay attention to the size of the spool.)

Can be applied to both engineering materials and conventional materials. Built-in preset filament settings, one click to apply the preset. The wire diameter is compatible with most of the materials on the market (Φ1.75mm, Φ2.85mm), and the Teflon tubing included with the product is Φ4*Φ3mm in size and 8cm*2 and 1m*2 in length.

Extra Large Interior Space, Super Adaptability

Specifications

Product Name / Model	Filament Dryer E2
Package Dimensions	454mm × 276mm × 362mm (LWH)
Product Dimensions	400mm × 220mm × 307mm (LWH)
Internal Dimensions	372mm × 192mm × 255mm (LWH)
Maximum Spool Size	Φ250mm × 153mm (1KG × 2 or 2KG × 2 or 3KG × 1, based on SUNLU spools)
Net Weight / Gross Weight	6.1KG / 7KG
Operating Environment	Temperature: 10℃–35℃, Relative Humidity: ≤95%
Working Temperature Range	35℃–110℃
Humidity Display Range	10%–90% (Accuracy ±10%)
Note 1	When working temperature ≥ 80℃, humidity sensor enters protection mode (displays <10% humidity)
Note 2	After temperature drops to 70℃, humidity sensor recovers original accuracy after about 20 hours
Timer Range	0–99 Hours
Power Input	Please verify local voltage compatibility. Select voltage based on silk-screen marking on the product
Maximum Operating Current	2.2A @ 230V, 500W
Standby Power	≤1W
Compatible Filament Diameters	Φ1.75mm / Φ2.85mm / Φ3.0mm

What's in the Box

Reviews

Write a review!

Best Sellers

Bambu Textured PEI Plate

Price: $79.00
Bambu Scraper 3 pcs

Price: $12.08
Bambu Lab - PLA Basic (Refill) - Black - 1KG

Price: $32.00
ESUN - PETG filament, 1.75mm, Solid Blue, 1kg/roll

Price: $34.50