All Items
In Stock

Products 1-11 of 11
Show

Fiber Optic Fabric - Black (30x30cm)

Back Order
Availability: Back Order
Item #: COM-15422 -
Price: $61.82
Sparkfun

This black fiber optic fabric is a cool and unique way to add some shine to your e-textiles project. There are optical fibers actually woven into this piece of fabric! Simply shine a bright light...

This black fiber optic fabric is a cool and unique way to add some shine to your e-textiles project. There are optical fibers actually woven into this piece of fabric! Simply shine a bright light into the fiber bundle, which is collected at one end, and the fabric fills with little shining pinpoints. You can make the fabric nearly glow with a little bit of abrasion, just rough it up with fine sandpaper to damage the fiber and make it "leak" light. Selective abrasion is a great way to make a...

Loomia 4-Wire Bus

Back Order
Availability: Back Order
Item #: COM-17863 -
Price: $65.53
Sparkfun

The straight Loomia 4-wire Bus has four leads that are each 0.15in wide. Each "wire" is low resistance, giving you fast data speed and solid wattage without heating up. Each bus is twistable,...

The straight Loomia 4-wire Bus has four leads that are each 0.15in wide. Each "wire" is low resistance, giving you fast data speed and solid wattage without heating up. Each bus is twistable, drapable, and bendable for all soft circuit needs. This bus can be easily soldered to the S-curve Bus or C-Curve Bus to make different shaped traces for wearable tech applications. Loomia parts are designed to be easily soldered together, and work well with popular micro controllers like Arduino Nano and...

Loomia 5V - 7.2V Heater

Out of Stock
Availability: Out of Stock
Item #: COM-17858 -
Price: $118.57
Sparkfun

The Loomia 5V - 7.2V Heater is made to work with an off the shelf, 5V battery pack or two lipo batteries in series (just make sure both can output 2A safely) and will get hotter depending on the...

The Loomia 5V - 7.2V Heater is made to work with an off the shelf, 5V battery pack or two lipo batteries in series (just make sure both can output 2A safely) and will get hotter depending on the voltage you use. The heater warms up quickly with tangible heat within 60 seconds and a top heat after 2 min. Use this component for heating wearables, or for thermochromic effects. Loomia parts are designed to be easily soldered together, and work well with popular micro controllers like Arduino Nano...

Loomia C-Curve Bus

Back Order
Availability: Back Order
Item #: COM-17862 -
Price: $65.53
Sparkfun

The C-Curve Bus is perfect for connecting two 0.15in buses together at a wide angle. Try using this part for creating conductive lines over shoulders or over large surface areas. Loomia parts are...

The C-Curve Bus is perfect for connecting two 0.15in buses together at a wide angle. Try using this part for creating conductive lines over shoulders or over large surface areas. Loomia parts are designed to be easily soldered together, and work well with popular micro controllers like Arduino Nano and Teensy. The system revolves around Loomia's custom interconnect, which allows for a simple connection between buses. The interconnect can be soldered to headers for easy breadboarding. From...

Loomia Double Backlit User Interface

Back Order
Availability: Back Order
Item #: COM-17865 -
Price: $118.57
Sparkfun

The Loomia Double Backlit User Interface is like the Single Backlit Button, but twice the fun! Use this part if you need to control something up and down, or right to left. Using cut-out vinyl, you...

The Loomia Double Backlit User Interface is like the Single Backlit Button, but twice the fun! Use this part if you need to control something up and down, or right to left. Using cut-out vinyl, you can create icons and decals on fabric that show your users the button functionalities. Loomia parts are designed to be easily soldered together, and work well with popular micro controllers like Arduino Nano and Teensy. The system revolves around Loomia's custom interconnect, which allows for a...

Loomia Mega Pressure Matrix

Back Order
Availability: Back Order
Item #: COM-17861 -
Price: $61.69
Sparkfun

Like the Mini Pressure Sensor... but bigger! The Loomia Mega Pressure Matrix has six leads, allowing you to map which point you are at in the 3x3 matrix and get a pressure mapping over a surface....

Like the Mini Pressure Sensor... but bigger! The Loomia Mega Pressure Matrix has six leads, allowing you to map which point you are at in the 3x3 matrix and get a pressure mapping over a surface. Each area has an analog readout that varies depending on the weight of the item on the pressure sensor. Generally, sensor values will read from 500K Ohms to 100 Ohms depending on the force put onto the sensor. Loomia parts are designed to be easily soldered together, and work well with popular micro...

Loomia Mini Pressure Matrix

Out of Stock
Availability: Out of Stock
Item #: COM-17859 -
Price: $61.69
Sparkfun

If you are looking to map pressure over a 1.25in area, this is the one. The Loomia Mini Pressure Matrix has six leads, allowing you to map which point you are at in the 3x3 matrix. Each area has an...

If you are looking to map pressure over a 1.25in area, this is the one. The Loomia Mini Pressure Matrix has six leads, allowing you to map which point you are at in the 3x3 matrix. Each area has an analog readout that varies depending on the weight of the item on the pressure sensor. Generally, sensor values will read from 500K Ohms to 100 Ohms depending on the force put onto the sensor. Loomia parts are designed to be easily soldered together, and work well with popular micro controllers like...

Loomia S-Curve Bus

Back Order
Availability: Back Order
Item #: COM-17856 -
Price: $65.53
Sparkfun

The Loomia S-Curve Bus is perfect for when you need to make an unusual geometry from the LEL (Loomia Electronic Layer) buses. You can combine two to make a big C-Curve to go around an elbow, or just...

The Loomia S-Curve Bus is perfect for when you need to make an unusual geometry from the LEL (Loomia Electronic Layer) buses. You can combine two to make a big C-Curve to go around an elbow, or just use one to route wiring where you need it for soft robotics or for an installation. Loomia parts are designed to be easily soldered together, and work well with popular micro controllers like Arduino Nano and Teensy. The system revolves around Loomia's custom interconnect, which allows for a simple...

Loomia Serpentine Bus

Back Order
Availability: Back Order
Item #: COM-17857 -
Price: $65.53
Sparkfun

This Loomia Serpentine Bus has 0.15in traces making it compatible with the S-Curve and C-Curve buses. Use this bus for additional stretch as it has up to 20% elongation. We suggest this bus for...

This Loomia Serpentine Bus has 0.15in traces making it compatible with the S-Curve and C-Curve buses. Use this bus for additional stretch as it has up to 20% elongation. We suggest this bus for wearable tech applications. Loomia parts are designed to be easily soldered together, and work well with popular micro controllers like Arduino Nano and Teensy. The system revolves around Loomia's custom interconnect, which allows for a simple connection between buses. The interconnect can be soldered...

Loomia Single Backlit Button

Back Order
Availability: Back Order
Item #: COM-17864 -
Price: $81.69
Sparkfun

The Loomia Single Backlit Button is a simple mechanical switch that comes with an LED inside. When you press the button, the circuit is completed, driving your pin high or low. Use the embedded LED...

The Loomia Single Backlit Button is a simple mechanical switch that comes with an LED inside. When you press the button, the circuit is completed, driving your pin high or low. Use the embedded LED to make a glowing power icon, logo, or whatever suits your fancy. Loomia parts are designed to be easily soldered together, and work well with popular micro controllers like Arduino Nano and Teensy. The system revolves around Loomia's custom interconnect, which allows for a simple connection between...

Loomia Single Pressure Sensor

Back Order
Availability: Back Order
Item #: COM-17860 -
Price: $61.69
Sparkfun

The Loomia Single Pressure Sensor gives you an analog read that maps to force on the sensor. The more you press, the lower the resistance goes, perfect for on-body pressure related sensing like...

The Loomia Single Pressure Sensor gives you an analog read that maps to force on the sensor. The more you press, the lower the resistance goes, perfect for on-body pressure related sensing like ribcage expansion for breathing. This sensor is small but mighty, making it convenient for small surface area applications. Loomia parts are designed to be easily soldered together, and work well with popular micro controllers like Arduino Nano and Teensy. The system revolves around Loomia's custom...