All Items
In Stock

Products 1-47 of 47
Show

40 Pin Break Away Male Header- Long Straight-10 Pcs

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: FIT0105 -
Price: $8.71
DFRobot

These are a longer version of our standard break away headers. They are 10mm long which allows you use them socket to socket. The plastic separator can be slid up or down to accommodate your needs....

These are a longer version of our standard break away headers. They are 10mm long which allows you use them socket to socket. The plastic separator can be slid up or down to accommodate your needs. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers. It is used on Arduino Ethernet Shield.|ShippingList| 40 Pin Header x10

Acrylic Case for LattePanda - Cooling Fan Compatible!

Out of Stock
Availability: Out of Stock
Item #: FIT0474 -
Price: $12.93
DFRobot

This acrylic case is a solid enclosure for your LattePanda single board computer. It protects the board from ESD damage and the transparent acrylic lets you view the indicator LEDs directly. There...

This acrylic case is a solid enclosure for your LattePanda single board computer. It protects the board from ESD damage and the transparent acrylic lets you view the indicator LEDs directly. There is easy access to USB, HDMI, SD and GPIO and antenna. The design has been revised so that it can accommodate the LattePanda cooling fan kit. There is also plenty of room for mounting heatsinks to the CPU directly if you wish. Assembly is simple and printed assembly instructions are included. The...

Acrylic Enclosure Kit_A for Raspberry Pi B+

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: EL-RA000078AA -
Price: $10.02
Elecrow

Keep your Raspberry Pi computer safe and sound in this lovely clear acrylic enclosure. This enclosure is special designed for the Raspberry Pi Model B+. It comes as 6 pieces of acrylic boards and...

Keep your Raspberry Pi computer safe and sound in this lovely clear acrylic enclosure. This enclosure is special designed for the Raspberry Pi Model B+. It comes as 6 pieces of acrylic boards and some other modules such DC fan, heat sink and even screwdriver, to help user better experience with the Raspberry Pi Model B+.     This ingenious design has no screws or standoffs and there are cute little feet cut into the sides so that it stands up above your desk. There are...

Acrylic Romeo Base - Star

Out of Stock
Availability: Out of Stock
Item #: DWG0004-S -
Price: $2.67
DFRobot

Last month, We released the UNO Base. A beautiful acrylic base for Arduino UNO. It&;#39;s a nice gift for my UNO baby. It&;#39;s a nice shoe, a good protection, an eye-catching killer. Then my UNO...

Last month, We released the UNO Base. A beautiful acrylic base for Arduino UNO. It&;#39;s a nice gift for my UNO baby. It&;#39;s a nice shoe, a good protection, an eye-catching killer. Then my UNO is extremely different to others. This time we offer more choise for the Xboard Relay and Romeo. Transparent acrylic panels looks crystal clear and clean. Two different choise for different hobbies. The basic version is a atable base and the special version is more eye-catching. My girl friend has...

Acrylic UNO Base

Out of Stock
Availability: Out of Stock
Item #: DWG0003 -
Price: $2.59
DFRobot

Arduino UNO is a very popular product, many makers to use it to build their own project.Last week, our beautiful girl engineer suddenly blurting: "If it has a nice base and this stick ah!", Let's...

Arduino UNO is a very popular product, many makers to use it to build their own project.Last week, our beautiful girl engineer suddenly blurting: "If it has a nice base and this stick ah!", Let's make it! "We compared a variety of different colors and materials, after repeated screening, and ultimately to select it: 68% transmittance, milky white, double-sided frosted acrylic panels?Made in Germany? High precision laser cutting and high-quality raw materials to produce this beautiful base.It...

Acrylic Xboard Relay Base - Universe

Out of Stock
Availability: Out of Stock
Item #: DWG0005-U -
Price: $2.07
DFRobot

Last month, We released the UNO Base. A beautiful acrylic base for Arduino UNO (similar as DFRduino UNO). It's a nice gift for my UNO baby. It's a nice shoe, a good protection, an eye-catching...

Last month, We released the UNO Base. A beautiful acrylic base for Arduino UNO (similar as DFRduino UNO). It's a nice gift for my UNO baby. It's a nice shoe, a good protection, an eye-catching killer. Then my UNO is extremely different to others. This time we offer more choise for the Xboard Relay and Romeo - an Arduino Robot Control Board. Transparent acrylic panels looks crystal clear and clean. Two different choise for different hobbies. The basic version is a atable base and the special...

Adjustable Screen Holder

Out of Stock
Availability: Out of Stock
Item #: FIT0561 -
Price: $3.36
DFRobot

This is an adjustable screen holder, made of all-metal iron material, with it, you can tilt your display on the desktop. It is simple and easy to use. You can adjust to different tilt angle. The...

This is an adjustable screen holder, made of all-metal iron material, with it, you can tilt your display on the desktop. It is simple and easy to use. You can adjust to different tilt angle. The holder is made of metal materials, simple structure, easy to use. The bracket is provided with rotating screws to adjust the stability of elastic reinforcement, which is suitable for different size display, and it is recommended to cooperate with 7 inches or larger panel or screen.|Features|Multiple...

Advanced Banana Pi Case - Tactical Black

Out of Stock
Availability: Out of Stock
Item #: FIT0396-B -
Price: $22.24
DFRobot

This nice and solid case for Banana Pi is a perfect choice for taking your Banana Pi anywhere. Made from ABS plastic and surfaced with mirror finishing, this case is functional yet stylish. Without...

This nice and solid case for Banana Pi is a perfect choice for taking your Banana Pi anywhere. Made from ABS plastic and surfaced with mirror finishing, this case is functional yet stylish. Without only six steps of easy installation, you will have a cool, lightweight and unique enclosure case for your Banana Pi.|Features| High quality; Fashion design; Professional design; Glass style surface; Ultra light; Simple installation; Perfectly matched to Banana Pi|Specification| Material: 100% ABS...

Advanced Banana Pi Case - White

Out of Stock
Availability: Out of Stock
Item #: FIT0396-W -
Price: $22.24
DFRobot

This nice and solid case for Banana Pi is a perfect choice for taking your Banana Pi anywhere. Made from ABS plastic and surfaced with mirror finishing, this case is functional yet stylish. Without...

This nice and solid case for Banana Pi is a perfect choice for taking your Banana Pi anywhere. Made from ABS plastic and surfaced with mirror finishing, this case is functional yet stylish. Without only six steps of easy installation, you will have a cool, lightweight and unique enclosure case for your Banana Pi.|Features| High quality; Fashion design; Professional design; Glass style surface; Ultra light; Simple installation; Perfectly matched to Banana Pi|Specification| Material: 100% ABS...

Air Quality Monitor (PM 2.5, Formaldehyde, Temperature &; Humidity Sensor)

Out of Stock
Availability: Out of Stock
Item #: SEN0233 -
Price: $136.18
DFRobot

This is a multifunction air quality monitor that can be detected not only the concentration of particles and formaldehyde but also the value of temperature and humidity. As the particle...

This is a multifunction air quality monitor that can be detected not only the concentration of particles and formaldehyde but also the value of temperature and humidity. As the particle concentration sensor it can be used to obtain the number of suspended particles in the air by laser. It also integrates in it an electrochemical probe for formaldehyde and an one- chip sensor for temperature and humidity. The sensor can be inserted into variable instruments related to the environment parameters...

Aluminum Alloy Metal Case for Raspberry Pi B+/2B/3B

Out of Stock
Availability: Out of Stock
Item #: FIT0460 -
Price: $34.39
DFRobot

This credit card-sized case is designed specifically for protecting Raspberry Pi B+/2B/3B. It is made by aluminum alloy and has a durable side panel. The GPIOs is available when opening the panel....

This credit card-sized case is designed specifically for protecting Raspberry Pi B+/2B/3B. It is made by aluminum alloy and has a durable side panel. The GPIOs is available when opening the panel. This case reserves two wall-mounting holes, a Micro SD card slot and some consumer ports.It is compatible with Raspberry Pi 3 model B, Raspberry Pi 2 model B and Raspberry Pi B+|Specification| Dimension: 12.5cm x 8.7cm x 4.8cm (4.92''x 3.42''x 1.89'') Weight: 120g|Documents| Assemble guide...

Aluminum Case For Raspberry Pi B+/2B/3B

Out of Stock
Availability: Out of Stock
Item #: FIT0417 -
Price: $30.86
DFRobot

Give your Pi a stylish, solid and sweet home! This elegantly crafted Raspberry Pi model B+/Pi 2 model B case is designed for the perfect combination of durability, affordability, and strength. It...

Give your Pi a stylish, solid and sweet home! This elegantly crafted Raspberry Pi model B+/Pi 2 model B case is designed for the perfect combination of durability, affordability, and strength. It comes with high quality aluminium casing, CNC metal processing, high-precision dimensions and anodic oxidation processing. Its rigid design also makes it a work of art. The grooved bottom design makes it easy for you to use GPIO cables.Fully compatible with Raspberry Pi 3 model B. Raspberry Pi 2 model...

Aluminum Heatsink Cooling Fan for LattePanda

Out of Stock
Availability: Out of Stock
Item #: FIT0504 -
Price: $20.69
DFRobot

The low profile ultra low noise fan keeps your LattePanda running at a stable temperature. The 2-Pin jumper connector makes it easily to connect with the CN2 headers on the board.The aluminum heat...

The low profile ultra low noise fan keeps your LattePanda running at a stable temperature. The 2-Pin jumper connector makes it easily to connect with the CN2 headers on the board.The aluminum heat sink includes an adhesive thermal pad on the rear that can stick on the metal shield on the board. With its aluminum casing, heat from CPU will be absorbed fast, giving you the best performance. This is a simple and effective way to keep your Lattepanda(win10 mini pc) cool!Note: Please pay attention...

Anemometer Kit (0-5V)

Out of Stock
Availability: Out of Stock
Item #: SEN0170 -
Price: $94.04
DFRobot

Ever want to build your own weather station? This anemometer is made of shell, wind cups and circuit module. It has built-in photovoltaic module, industrial microcomputer processor, and standard...

Ever want to build your own weather station? This anemometer is made of shell, wind cups and circuit module. It has built-in photovoltaic module, industrial microcomputer processor, and standard current generator. Made with aluminium alloy, the anemomter is of high strength, weather resistance and corrosion resistance. The millitary quality interface ensures long life of this anemometer, at the same time enhancing the accuracy of wind speed acquisition. Together with other components, this...

Antbo DIY Robot Kit - The Best Robot for Kids

Out of Stock
Availability: Out of Stock
Item #: ROB0140 -
Price: $205.14
DFRobot

Antbo is an assembling bionic robot. Kids will learn basic robotic knowledge and movement principles during the process of assembling the robot. Antbo uses nearly dozen sensors, simulation...

Antbo is an assembling bionic robot. Kids will learn basic robotic knowledge and movement principles during the process of assembling the robot. Antbo uses nearly dozen sensors, simulation artificial neuron network through the movement system and optimized gait algorithm to simulate the movement of insects. Rich interactive mode allows users to interact with the robot to have a variety of interesting, but also can use the Antbo app to control robot or voice control.Antbo’s form takes...

BLE Wireless Gamepad V2

Out of Stock
Availability: Out of Stock
Item #: DFR0304 -
Price: $97.40
DFRobot

Wondering if your newly bought gamepad can be used to both playing games and controlling a robot? The new BLE 4.0 wireless gamepad V2.0 produced by DFROBOT can meet all your requirements. Based on...

Wondering if your newly bought gamepad can be used to both playing games and controlling a robot? The new BLE 4.0 wireless gamepad V2.0 produced by DFROBOT can meet all your requirements. Based on TI CC2540 Bluetooth chip design, it is specially designed for DIY players and does not need programming. This gamepad is using hardware scanning structure, high respond speed and supports one keyboard toggle between central and peripheral roles. Under central device mode, it can be connected to any...

Bluno Link - A USB Bluetooth 4.0 (BLE) Dongle

Out of Stock
Availability: Out of Stock
Item #: TEL0087 -
Price: $17.07
DFRobot

Add bluetooth 4.0 to your PC, Mac directly with this USB BLE-Link. It uses the USB package which is compact and compatible with v2.1 and earlier, and also supports the latest v4.0/Bluetooth Low...

Add bluetooth 4.0 to your PC, Mac directly with this USB BLE-Link. It uses the USB package which is compact and compatible with v2.1 and earlier, and also supports the latest v4.0/Bluetooth Low Energy. Now you could use this adapter to receive/transmit data. With two USB-BLE Link users can do point-to-point wireless transparent transmission, master-slave machine setting, and wireless programming. It can also work as a PC BLE wireless programming adapter. Comaptible all DFRobot BLE series...

Bluno M3 - A STM32 ARM with Bluetooth 4.0 (Arduino Compatible)

Out of Stock
Availability: Out of Stock
Item #: DFR0329 -
Price: $51.54
DFRobot

The Bluno M3 is a new Arduino compatible prototyping platform based on a 32-bit ARM processor. This arduino microcontroller integrates a Bluetooth 4.0 chip and a STM32 ARM controller on the board....

The Bluno M3 is a new Arduino compatible prototyping platform based on a 32-bit ARM processor. This arduino microcontroller integrates a Bluetooth 4.0 chip and a STM32 ARM controller on the board. As a member of Bluno family, Bluno M3 inherits most common Bluno features, such as bluetooth connectivity, Bluetooth wireless programming and mobile phone controlling. In addition, thanks to its new 32-bit microcontroller, Bluno M3 has a much more powerful performance, more storage space and more...

Bluno Nano - An Arduino Nano with Bluetooth 4.0

Out of Stock
Availability: Out of Stock
Item #: DFR0296 -
Price: $42.92
DFRobot

Here comes the second member in DFRobot Bluno family, the Bluno Nano. Came in a size of a gum, the Bluno Nano is perfect for BLE projects with limited space or weight. Everything is getting smart...

Here comes the second member in DFRobot Bluno family, the Bluno Nano. Came in a size of a gum, the Bluno Nano is perfect for BLE projects with limited space or weight. Everything is getting smart now: wristbands and watches monitor your daily behaviors and become social; phone-controlled camera add-ons move and take shots as you like; smart gardens grow virtually in your ipad and sharing is made easy... The Bluetooth Low Energy technology has made it easy and achievable. It is exciting to see...

Cookie I/O Expansion Shield

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: DFR0375 -
Price: $13.45
DFRobot

The Cookie I/O expansion shield is designed for beginners to electronics. The shield is directly compatible with the gravity series. We have implemented fail-safe systems to prevent bad connections...

The Cookie I/O expansion shield is designed for beginners to electronics. The shield is directly compatible with the gravity series. We have implemented fail-safe systems to prevent bad connections from destroying the board. The board is protected from reverse voltage input. And connector ports only accept connections the correct way around. These fail safes make the board ideal for beginners and classroom settings - no need to worry about your students making the wrong connections!|Specificati...

Creator-4Shuttlecock Kit

Out of Stock
Availability: Out of Stock
Item #: TOY0059 -
Price: $13.79
DFRobot

Playing shuttlecock has been a traditional leisure activity in China, in which players try to keep a weighted shuttlecock in the air using their feet, shin, knee without using the hands. According...

Playing shuttlecock has been a traditional leisure activity in China, in which players try to keep a weighted shuttlecock in the air using their feet, shin, knee without using the hands. According to study, the first form of shuttlecock playing was discovered during the Spring and Autumn Period, which was over 2000 years ago. Now, this traditional game has evovled and is played on a court similar to badminton and volleyball, or be played artistically, among a circle of players in a street or...

Crimp Pins for Female Housing Pins(PH2.54)

Out of Stock
Availability: Out of Stock
Item #: FIT0210 -
Price: $1.71
DFRobot

This is a package of crimp pins for female housing pins with the pitch of 2.54mm(0.1"). You can make customized cables that mate with the 0.1"-spaced male pins. |ShippingList| Crimp Pin for Female...

This is a package of crimp pins for female housing pins with the pitch of 2.54mm(0.1"). You can make customized cables that mate with the 0.1"-spaced male pins. |ShippingList| Crimp Pin for Female Housing Pin(PH2.54) x50

FireBeetle Covers-Gravity I/O Expansion Shield

Out of Stock
Availability: Out of Stock
Item #: DFR0483 -
Price: $11.89
DFRobot

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption,...

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT). The series micro-controllers aims at IoT node of low-power consumption, attending to build the IoT hardware platform quickly and conveniently. There are three types of FireBeetle, containing Boards (main control), Covers (expansion boards) and related Accessories. FireBeetle Covers-Gravity I/O Expansion Shield is an adapter for Gravity sensors and modules. With this...

FireBeetle Covers-LoRa Radio 915MHz

Out of Stock
Availability: Out of Stock
Item #: TEL0122 -
Price: $30.86
DFRobot

DFRobot FireBeetle series are low power consumption controllers designed for Internet of Things (IoT) development. The FireBeetle series are aiming straight at the point fast and convenient...

DFRobot FireBeetle series are low power consumption controllers designed for Internet of Things (IoT) development. The FireBeetle series are aiming straight at the point fast and convenient low-power IoT building. There are three categories of FireBeetle series, containing Boards (main control), Covers (expansion boards) and related Accessories.FireBeetle LoRa 915MHz wireless transmission module adopts a high-performance chip SX127x LoRa 915MHz and with built-in PA (power amplifier) gain,...

FireBeetle ESP8266 IOT Microcontroller (Supports Wi-Fi)

Out of Stock
Availability: Out of Stock
Item #: DFR0489 -
Price: $20.51
DFRobot

DFRobot FireBeetle is a series of low-power-consumption development hardware designed for Internet of Things (IoT). Firebeetle ESP8266 is a development board integrated with IoT WiFi, TCP/IP, 32-bit...

DFRobot FireBeetle is a series of low-power-consumption development hardware designed for Internet of Things (IoT). Firebeetle ESP8266 is a development board integrated with IoT WiFi, TCP/IP, 32-bit MCU, 10-bit ADC and multiple interfaces such as HSPI, UART, PWM, I2C and I2S. In DTIM10, the full power consumption to maintain WiFi connection reached to 1.2mW. Equipped with 16MB outer SPI flash memory, ESP8266 is available for programs and firmware storage.Compatible with Arduino programming...

I2C 20x4 Arduino LCD Display Module

Out of Stock
Availability: Out of Stock
Item #: DFR0154 -
Price: $40.60
DFRobot

This is a 20x4 Arduino compatible LCD display module with high speed I2C interface. It is able to display 20x4 characters on two lines, white characters on blue background.Generally, LCD display...

This is a 20x4 Arduino compatible LCD display module with high speed I2C interface. It is able to display 20x4 characters on two lines, white characters on blue background.Generally, LCD display will run out of Arduino pin resource. It needs 6 digital pins and 2 power pin for a LCD display. If you want to build a robot project, it will be a problem with Arduino UNO and LCD display. This I2C 20x4 LCD display module is designed for Arduino microcontroller. It is using I2C communication...

Industrial pH Electrode - Armor Casing

Out of Stock
Availability: Out of Stock
Item #: FIT0348 -
Price: $85.33
DFRobot

This pH combination electrode is made of sensitive glass membrane with low impedance.It can be used in a variety of PH measurements with fast response, good thermal stability.It has the good...

This pH combination electrode is made of sensitive glass membrane with low impedance.It can be used in a variety of PH measurements with fast response, good thermal stability.It has the good reproducibility, difficult to hydrolysis, and basically eliminate the alkali error .In 0 to 14pH range,the output voltage of the electrode is linear.The reference system which consist of the Ag/AgCl gel electrolyte salt bridge has a stable half-cell potential and excellent anti-pollution performance.The...

Input Shield for Arduino

Out of Stock
Availability: Out of Stock
Item #: DFR0008 -
Price: $27.67
DFRobot

The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons(Red,Yellow,Blue,Green). The reserved APC220 Radio Data...

The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons(Red,Yellow,Blue,Green). The reserved APC220 Radio Data Module(SKU:TEL0005) interface and the Xbee interface is deisgned to facilitate the realization of wireless rocker button controller. The shield can be easily stacked on top of your Arduino boards. It can also connect with OLED2864 & OLED9664.|Features| Dual axis mini joystick Connects to your Arduino using male to...

Insectbot Hexa -An Arduino Based Walking Robot Kit For Kids

Out of Stock
Availability: Out of Stock
Item #: KIT0090 -
Price: $64.64
DFRobot

With a celebrated reputation as an affordable, simple and fun-to-play DIY robot kit, the Insectbot breed has now evoled to its second generation: the Insectbot Hexa-An Arduino Based Walking Robot...

With a celebrated reputation as an affordable, simple and fun-to-play DIY robot kit, the Insectbot breed has now evoled to its second generation: the Insectbot Hexa-An Arduino Based Walking Robot Kit For Kids.Tools Needed Soldering iron Scissors Screwdriver PliersVersion Update: The new Insectbot Hexa V2 uses Beetle BLE(The smallest Arduino bluetooth 4.0) instead of Beetle, which supports wireless programming and communication. Explore much more possibilities with Bluetooth 4.0!An apology:...

Official Raspberry Pi 3 B Case

Out of Stock
Availability: Out of Stock
Item #: FIT0499 -
Price: $15.50
DFRobot

This is official Raspberry Pi 3 Model B case with red/white color. It has following features & benefits: Easy snap-fit assembly Range of case display/access options: fully closed, sides away, birds...

This is official Raspberry Pi 3 Model B case with red/white color. It has following features & benefits: Easy snap-fit assembly Range of case display/access options: fully closed, sides away, birds eye view Cut-outs of all connection points Plastic LED light protector microSD card cut-out Stick on rubber feet for case stability |Specification| Dimension: 97*70*30 mm/ 3.81*2.75*1.18 inches Weight: 52g|ShippingList| Official Raspberry Pi 3 B Case (Red/White) x1 ...

Particle Photon

Out of Stock
Availability: Out of Stock
Item #: DFR0373 -
Price: $32.75
DFRobot

The Photon is a $19 tiny Wi-Fi development kit for creating connected projects and products for the Internet of Things. It's easy to use, it's powerful, and it's connected to the cloud.The tools...

The Photon is a $19 tiny Wi-Fi development kit for creating connected projects and products for the Internet of Things. It's easy to use, it's powerful, and it's connected to the cloud.The tools that make up the Photon's ecosystem (and come along with the board) are designed to let you build and create whether you're an embedded engineer, web developer, Arduino enthusiast or IoT entrepreneur. You'll be able to write your firmware in our web or local IDE, deploy it over the air, and build your...

PCB of Arduino LCD Keypad Shield

Out of Stock
Availability: Out of Stock
Item #: DFR0009-BP -
Price: $11.72
DFRobot

This is the back panel pcb of 1602 Arduino LCD Shield. This shield allows you to place your own LCD onto this shield. It only requieres a 16x2 HD44780 compatible LCD. This Shield uses Arudino...

This is the back panel pcb of 1602 Arduino LCD Shield. This shield allows you to place your own LCD onto this shield. It only requieres a 16x2 HD44780 compatible LCD. This Shield uses Arudino LCD4Bit library. The pcb is compatible with the following LCD: Basic 16x2 Character LCD - Black on Yellow 5V Basic 16x2 Character LCD - White on Blue 5V |Applications|This is a great shield if you have an extra LCD laying arround or want to move your current LCD from breadboard and wires to a more stable...

Pi Tin for the Raspberry Pi - White

Stocked
Availability: Stocked
Item #: PRT-11979 -
Price: $11.38
Sparkfun

"The Raspberry Pi is everybody’s favorite little computer, the last thing that you’d want is for something bad to happen to it. Why not protect it with one of these snazzy plastic...

"The Raspberry Pi is everybody’s favorite little computer, the last thing that you’d want is for something bad to happen to it. Why not protect it with one of these snazzy plastic enclosures? These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together. As you may have noticed, these Pi Tins are actually an opaque...

Plastic Case Raspberry Pi B+

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: EL-RA0008AP -
Price: $5.01
Elecrow

     A firm& stable plastic case for raspberry pi B+, every port can be accessible with this case.      Spec Size: 90x70x24.8 mm ...

     A firm& stable plastic case for raspberry pi B+, every port can be accessible with this case.      Spec Size: 90x70x24.8 mm ...

Plywood Case for LattePanda

Out of Stock
Availability: Out of Stock
Item #: FIT0475 -
Price: $14.14
DFRobot

This plywood case is a solid enclosure for your LattePanda Windows 10 SBC. The case protects the board from ESD damage while letting you see status LEDs and providing access to USB, HDMI, SD card,...

This plywood case is a solid enclosure for your LattePanda Windows 10 SBC. The case protects the board from ESD damage while letting you see status LEDs and providing access to USB, HDMI, SD card, GPIO and antenna. Printed assembly instructions are provided and case assembly can be completed within an hour.What is LattePanda?LattePanda is a complete Windows 10 computer on a single board!It includes everything a regular PC has and can do anything that a regular PC does. It is compatible with...

Portable Hand Crank Power Generator with Voltage Regulator

Out of Stock
Availability: Out of Stock
Item #: DFR0368 -
Price: $222.38
DFRobot

Reliable, self-sustainable power to individuals anywhere, anytime.This is a military standard, portable hand crank power generator and rechargeable emergency power, a must-have in the zombie survial...

Reliable, self-sustainable power to individuals anywhere, anytime.This is a military standard, portable hand crank power generator and rechargeable emergency power, a must-have in the zombie survial list. Its usage ranges from field operations, rescue, natural disasters, survival training, emergency communications, power shortage, touring activities, and many more. Power your traffic radio, satellite phones, walkie-talkie, laptop, PDA, mobile phones, cameras, digital cameras, music CD, MP3,...

Powerline Ethernet Adapter (200M) -2 Units

Out of Stock
Availability: Out of Stock
Item #: TEL0057 -
Price: $162.90
DFRobot

The Powerline Ethernet Adapter(STP-PLC200PT/STP-PLC200PP-A) is a device which can deliver a fast Internet signal to the farthest corners of your home.It operate by sending a modulated carrier signal...

The Powerline Ethernet Adapter(STP-PLC200PT/STP-PLC200PP-A) is a device which can deliver a fast Internet signal to the farthest corners of your home.It operate by sending a modulated carrier signal over your regular AC wiring. You can route your Internet connection around your house over your regular electrical power lines.It really works. It&;#39;s fast and it doesn&;#39;t disrupt your electrical system. Even better, it requires zero technical skill. The devices conform to the HomePlug AV...

Project Notebook (Black)

Out of Stock
Availability: Out of Stock
Item #: DWG0001-B -
Price: $5.00
DFRobot

This is a DFRobot electronic project notebook. We have been using this for a long time and now it has become a necessity for all DFRobot engineers. This notebook represents creativity, attention to...

This is a DFRobot electronic project notebook. We have been using this for a long time and now it has become a necessity for all DFRobot engineers. This notebook represents creativity, attention to details and the spirit of opensource to us. Now we want to share this great notebook with you.|Specification| Size: 128mm x 182mm(5.04"x7.17") Color: Black 136 pages inside 0.1" grid on each page |ShippingList| Project Notebook(Black) x1 ...

Raspberry Pi Enclosure - Black (RPi2, B+)

Stocked
Availability: Stocked
Item #: DEV-12997 -
Price: $15.56
Sparkfun

"The Raspberry Pi is THE new favorite of development platforms, so the last thing that you’d want is for something bad to happen to it. Why not protect it with one of these snazzy black...

"The Raspberry Pi is THE new favorite of development platforms, so the last thing that you’d want is for something bad to happen to it. Why not protect it with one of these snazzy black plastic enclosures? These cases protect the RPi2 and Model B+ from things like rogue wires that might short it out while still allowing full access to the board as well as proper airflow to keep your new toy cool! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together....

Raspberry Pi Enclosure - Clear (RPi3, RPi2, B+)

Back Order
Availability: Back Order
Item #: DEV-12996 -
Price: $15.56
Sparkfun

"The Raspberry Pi is THE new favorite of development platforms, so the last thing that you’d want is for something bad to happen to it. Why not protect it with one of these snazzy clear...

"The Raspberry Pi is THE new favorite of development platforms, so the last thing that you’d want is for something bad to happen to it. Why not protect it with one of these snazzy clear plastic enclosures? These translucent cases protect the Raspberry Pi 3, RPi2, and Model B+ from things like rogue wires that might short it out while still allowing full access to the board as well as proper airflow to keep your new toy cool! Simply snap the RPi into the bottom half of the enclosure, then...

Raspberry Pi Zero &; Zero W Case Pack (Red/White)

Stocked-NoBackOrder
Availability: Stocked-NoBackOrder
Item #: FIT0545 -
Price: $10.17
DFRobot

This is a special designed Raspberry Pi Zero & Zero W case. It is made of ABS material, and contains 3 kinds of top covers: GPIO cover, camera cover and full cover. We also prepare a camera...

This is a special designed Raspberry Pi Zero & Zero W case. It is made of ABS material, and contains 3 kinds of top covers: GPIO cover, camera cover and full cover. We also prepare a camera connection cable for the CSI port. GPIO CoverCamera CoverFull CoverIt is compatible with Raspberry Pi Zero and Zero W.|Features|ABS MaterialCompatible with Raspberry Pi Zero & Zero W|Specification|Models: Raspberry pi Zero, Raspberry pi Zero WShell Material: ABS materialDimension: 76 x 35 x 12 (mm)/ 3 x...

Romeo BLE - Arduino Robot Control Board with Bluetooth 4.0

Out of Stock
Availability: Out of Stock
Item #: DFR0305 -
Price: $68.09
DFRobot

Romeo family is an All-in-One Arduino based control board especially designed for robotics applications from DFRobot. It benefits from the Arduino open source platform, it is supported by thousands...

Romeo family is an All-in-One Arduino based control board especially designed for robotics applications from DFRobot. It benefits from the Arduino open source platform, it is supported by thousands of open source codes, and can easily be expanded with your Arduino shields. The integrated 2 way DC motor driver and wireless socket allows you to start your own robot project immediately without the need for an additional motor driver. Not just has the motor driver, Romeo is also designed to have...

Romeo BLE mini - Small Arduino Robot Control Board with Bluetooth 4.0

Out of Stock
Availability: Out of Stock
Item #: DFR0351 -
Price: $44.65
DFRobot

Romeo BLE mini is a simplified version of Romeo board. It inherits all functions of Romeo BLE. Moreover, IT GOT A SMALLER SIZE! Yes, you got it all. It has 8 Digital pins, 4 analog pins and...

Romeo BLE mini is a simplified version of Romeo board. It inherits all functions of Romeo BLE. Moreover, IT GOT A SMALLER SIZE! Yes, you got it all. It has 8 Digital pins, 4 analog pins and integrates Bluetooth 4.0 wireless communication function. And it can easy to drive the mobile platform using two 1.2A H-bridged Motor Driver to meet the needs of small scale robots. We hope Romeo BLE mini will be a good assistant to Makers.Version Update: V2.0 has upgraded its motor driver IC, it replaces...

Silicone Case for LattePanda

Out of Stock
Availability: Out of Stock
Item #: FIT0516 -
Price: $11.89
DFRobot

This silicone case is specifically designed for LattePanda development board. Not only using non-toxic and non-smell silicone material (food grade), but also provide a full range of protection...

This silicone case is specifically designed for LattePanda development board. Not only using non-toxic and non-smell silicone material (food grade), but also provide a full range of protection structure to avoid damage caused by accidental drop.It is worth mentioning that the silicone case has some other functions. All interface for external connection has been reserved, and each interface has a clear mark for the function. The hollow-carved design makes it easy to mount the heatsink cooling...

SIM 908 GPS/GPRS/GSM Shield For Arduino

Out of Stock
Availability: Out of Stock
Item #: TEL0051 -
Price: $154.28
DFRobot

This is an Arduino GPS/GPRS/GSM shield from DFRobot. This shield with a Quad-band GSM/GPRS engine works on frequencies EGSM 900MHz/DCS 1800MHz and GSM850 MHz/PCS 1900MHz. It also supports GPS...

This is an Arduino GPS/GPRS/GSM shield from DFRobot. This shield with a Quad-band GSM/GPRS engine works on frequencies EGSM 900MHz/DCS 1800MHz and GSM850 MHz/PCS 1900MHz. It also supports GPS technology for satellite navigation. It's possible for your robot and control system to send messages and use the GSM network. It is controlled via AT commands (GSM07.07 ,07.05 and SIMCOM enhanced AT Commands). And the design of this shield allows you to drive the GSM & GPS function directly with the...

Transparent Acrylic Case with Cooling fan and Heatsink for Pi B+/2B/3B

Out of Stock
Availability: Out of Stock
Item #: FIT0540 -
Price: $6.72
DFRobot

The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all...

The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explore computing, and to learn how to program in languages like Scratch and Python. It’s capable of doing everything you’d expect a desktop computer to do, from browsing the internet and playing high-definition video, to making spreadsheets, word-processing, and playing...

Transparent Plastic Enclosure for Raspberry Pi B+/2B/3B

Out of Stock
Availability: Out of Stock
Item #: FIT0391-T -
Price: $8.45
DFRobot

The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all...

The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explore computing, and to learn how to program in languages like Scratch and Python. It’s capable of doing everything you’d expect a desktop computer to do, from browsing the internet and playing high-definition video, to making spreadsheets, word-processing, and playing...