All Items
In Stock

Products 1-18 of 18
Show

Alligator Clip

Back Order
Availability: Back Order
Item #: PRT-00111 -
Price: $0.95
Sparkfun

A staple for the electrical engineer. I can't tell you how many times I've been one clip short! Note: Sold as a single unit.

A staple for the electrical engineer. I can't tell you how many times I've been one clip short! Note: Sold as a single unit.

Analog Panel Meter - 0 to 5 VDC

Back Order
Availability: Back Order
Item #: TOL-10285 -
Price: $11.56
Sparkfun

This analog panel meter measures DC voltage from 0-5 volts with 2.5% accuracy. It has a clear and easy to read scale and an adjustable dial. These come in handy for measuring the output of sensors...

This analog panel meter measures DC voltage from 0-5 volts with 2.5% accuracy. It has a clear and easy to read scale and an adjustable dial. These come in handy for measuring the output of sensors with 5V ranges. The face of the meter is 45x45mm overall. The mounting hole should be 38mm. The overall depth of the meter is 35mm. Documents: Product Sheet

Digital LED Voltmeter

Back Order
Availability: Back Order
Item #: PRT-14313 -
Price: $4.31
Sparkfun

This Digital LED Voltmeter measures the voltage at a particular point of the system it has been hooked up to and then provides a readout on its three 7-segment LEDs. This voltmeter is able to...

This Digital LED Voltmeter measures the voltage at a particular point of the system it has been hooked up to and then provides a readout on its three 7-segment LEDs. This voltmeter is able to provide a readout of voltages from 2.5VDC to 30VDC within a 1% accuracy. Features: Range: 2.5VDC --- 30VDC Display: Three 0.28" Red 7-Segment LEDs Refresh Rate: ~1sec Accuracy Within 1%

Digital Voltmeter Ammeter 30V 10A Red and Blue

Back Order
Availability: Back Order
Item #: TOL-18374 -
Price: $10.63
Sparkfun

While a DMM is great for a quick check, a panel mount current and volt meter is handy when you need to constantly monitor a system. Battery backed systems can be quickly diagnosed by checking the...

While a DMM is great for a quick check, a panel mount current and volt meter is handy when you need to constantly monitor a system. Battery backed systems can be quickly diagnosed by checking the overall system voltage; run times can be calculated based on the instantaneous current consumption rates. For all those times and more, it's just super handy to have a meter available. This digital combination DC current/volt meter measures up to 30V and 10A using approximately 15mA quiescent current....

Heatsink Compound

Back Order
Availability: Back Order
Item #: PRT-09599 -
Price: $6.28
Sparkfun

This is a 5g syringe of white heatsink compound (aka thermal grease, thermal paste, thermal goo). Use this whenever you're connecting a component to a heatsink, it'll really help to dissipate even...

This is a 5g syringe of white heatsink compound (aka thermal grease, thermal paste, thermal goo). Use this whenever you're connecting a component to a heatsink, it'll really help to dissipate even more potentially damaging heat. This compound is composed of 50% silicone, 20% carbon, and 30% metal oxide. It has a thermal conductivity of 1.172 W/(mK), which should be plenty for voltage regulators, MOSFETs, motor drivers, audio amplifiers, etc. Features: Color: White Thermal Conductivity: 1.172...

Heatsink TO-220

Back Order
Availability: Back Order
Item #: PRT-00121 -
Price: $2.28
Sparkfun

Small heat sink for TO-220 components. Ideal for keeping your 5V and 3.3V regulators running cool. Black anodized bolt on type with 2.5W dissipation.

Small heat sink for TO-220 components. Ideal for keeping your 5V and 3.3V regulators running cool. Black anodized bolt on type with 2.5W dissipation.

Large Heatsink - Multiwatt Package

Out of Stock
Availability: Out of Stock
Item #: PRT-09576 -
Price: $24.11
Sparkfun

This beefy heatsink is designed to dissipate a lot of heat! The 6400BG heatsink fits TO-220, TO-218, TO-247, and Multiwatt packages - which means it's a great fit for the STA540, L298N, and all of...

This beefy heatsink is designed to dissipate a lot of heat! The 6400BG heatsink fits TO-220, TO-218, TO-247, and Multiwatt packages - which means it's a great fit for the STA540, L298N, and all of our T-220 package voltage regulators. Documents: Datasheet ...

MIKROE L Meter Click

Out of Stock
Availability: Out of Stock
Item #: TOL-19706 -
Price: $24.60
Sparkfun

L Meter Click is a compact and accurate Click board™, capable of measuring and monitoring the inductance of the external component. The board can be used to measure a wide range of inductance. The...

L Meter Click is a compact and accurate Click board™, capable of measuring and monitoring the inductance of the external component. The board can be used to measure a wide range of inductance. The design is based on a single high-speed voltage comparator LM311 by which the frequency of the oscillating LC circuit is measured and, based on the known value of capacitance, measures the unknown inductance value. L Meter Click can be used to measure inductance as well as to check the accuracy and...

MIKROE Tester Click

Back Order
Availability: Back Order
Item #: TOL-18847 -
Price: $14.71
Sparkfun

MIKROE Tester Click is a Click board™ used as a diagnostic tool on the mikroBUS™ socket. It contains an array of 2x6 LEDs, which signalize the presence of the HIGH/LOW logic level on each pin,...

MIKROE Tester Click is a Click board™ used as a diagnostic tool on the mikroBUS™ socket. It contains an array of 2x6 LEDs, which signalize the presence of the HIGH/LOW logic level on each pin, providing a visual feedback to the developer. Two additional LEDs indicate the presence of +3.3V and +5V on the mikroBUS™ power rails. This simple diagnostic tool can save hours of troubleshooting, saving the application developer from having to connect various complicated measurement instruments, only...

Monocle Magnifier - Illuminated

Back Order
Availability: Back Order
Item #: TOL-09316 -
Price: $20.83
Sparkfun

When working with small parts, sometimes you need magnification and some extra light. This is a monocle we use regularly in our production facility. It has a 10x lens with a working distance of...

When working with small parts, sometimes you need magnification and some extra light. This is a monocle we use regularly in our production facility. It has a 10x lens with a working distance of about 1-1/2". The 1" diameter eye piece fits snugly around your eye with a 15" aluminum-core headband. The LED provides sufficient light at the working distance. This loop magnifier set itself apart in our eyes because of the little LED on the side. Trying to view SMD connections is hard enough - the...

Non-Contact Infrared Thermometer

Back Order
Availability: Back Order
Item #: TOL-10830 -
Price: $56.97
Sparkfun

This non-contact infrared thermometer makes it a breeze to take quick and accurate surface temperature readings without getting too close for comfort. Laser sighting ensures that you're pointing at...

This non-contact infrared thermometer makes it a breeze to take quick and accurate surface temperature readings without getting too close for comfort. Laser sighting ensures that you're pointing at the right spot: Simply pull the trigger and line up the laser dot where you want to measure the temperature. The temp gun also has adjustable emissivity compensation for measuring the surface temp of more or less radiant objects. Features: Single-Spot Laser Sighting Adjustable Emissivity...

PCBite SP10 Probes for DMM (Two Pack)

Back Order
Availability: Back Order
Item #: TOL-19722 -
Price: $74.18
Sparkfun

This passive 1:1 probe is suitable for signal measurements and logic analyzers for high speed serial communication interfaces like SPI, CAN, USB, JTAG, I2C, UART etc. The probe can also be used for...

This passive 1:1 probe is suitable for signal measurements and logic analyzers for high speed serial communication interfaces like SPI, CAN, USB, JTAG, I2C, UART etc. The probe can also be used for resistance and voltage measurements, power and grounding of devices with continues currents of maximum two ampere. This product is a two piece complete SP10 probe set with one red and one black probe head (positive and negative) packed together with a set of red/black banana cables. Intended for...

PCBite SP10 Probes with Test Wires (Four Pack)

Out of Stock
Availability: Out of Stock
Item #: TOL-19723 -
Price: $148.36
Sparkfun

A truly hands-free probe! Makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just position the probe needle...

A truly hands-free probe! Makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just position the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. The probe is...

PCBite SP100 - Handsfree Oscilloscope Probe (100MHz)

Out of Stock
Availability: Out of Stock
Item #: TOL-19724 -
Price: $98.91
Sparkfun

A truly handsfree 100Mhz 10:1 oscilloscope probe! Makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just...

A truly handsfree 100Mhz 10:1 oscilloscope probe! Makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby...

PCBite SP200 - Handsfree Oscilloscope Probe (200MHz)

Out of Stock
Availability: Out of Stock
Item #: TOL-19725 -
Price: $123.64
Sparkfun

A truly handsfree 200Mhz 10:1 oscilloscope probe! Makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just...

A truly handsfree 200Mhz 10:1 oscilloscope probe! Makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs. The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby...

Small Heatsink

Back Order
Availability: Back Order
Item #: PRT-11510 -
Price: $4.99
Sparkfun

These tiny little black anodized heatsinks are perfect for cooling off small surface-mount components such as the Allegro A4983 stepper driver. **Note: **We ship these as singles Features:...

These tiny little black anodized heatsinks are perfect for cooling off small surface-mount components such as the Allegro A4983 stepper driver. **Note: **We ship these as singles Features: 0.19x0.25x0.30" Documents: Datasheet

Stickvise High Temperature PTFE Jaws

Out of Stock
Availability: Out of Stock
Item #: TOL-17594 -
Price: $32.15
Sparkfun

Concerned about accidentally melting the standard Nylon jaws on Stickvise? Upgrade to these high temperature PTFE jaws. They will not melt or become damaged by incidental contact with a soldering...

Concerned about accidentally melting the standard Nylon jaws on Stickvise? Upgrade to these high temperature PTFE jaws. They will not melt or become damaged by incidental contact with a soldering iron. These jaws come as a pair. Includes: 2x High Temperature PTFE Jaws

Thermal Tape 4x4" Square

Back Order
Availability: Back Order
Item #: PRT-17054 -
Price: $2.28
Sparkfun

Thermally Conductive Adhesive Transfer Tapes are designed to provide a preferential heat-transfer path between heat-generating components and heat sinks or other cooling devices (e.g., fans, heat...

Thermally Conductive Adhesive Transfer Tapes are designed to provide a preferential heat-transfer path between heat-generating components and heat sinks or other cooling devices (e.g., fans, heat spreaders or heat pipes). This is a 4x4" square, 0.2mm thickness piece of thermal tape. Features: 4x4" square 0.2mm thickness