Movement

    This is a standard '130 size' DC motor. It comes with a wider operating range than most toy motors: from 4.5 to 9VDC, This range makes them perfect for controlling with most...

    This is a standard '130 size' DC motor. It comes with a wider operating range than most toy motors: from 4.5 to 9VDC, This range makes them perfect for controlling with most of the Arduino Motor Shield, or with an Arduino where you are more likely to have 5 or 9V available than a high current 3V setting.      If you find it hard to fix this motor in your project, you can have a look at the 130 DC Motor Bracket, hope it helps for you....

This is a metal DC geared motor, 99:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 2.5 kg.cm. It is stable and durable!|Specification|Rated Voltage: 6...

This is a metal DC geared motor, 99:1 metal reducer. It has a small size and large torque. The maximum torque could arrive 2.5 kg.cm. It is stable and durable!|Specification|Rated Voltage: 6 VOperating Voltage Range 2~7.5VGear reduction ratio: 99:1Gearbox length: 23 mm"D" shape shaft diameter: 4 mmNo-load speed: 15 RPM @ 6VNo-load current: 50 mA Locked-rotor torque: 2.5 Kg.cmLocked-rotor current: 0.6 AOperating Temperature: -20?60?Weight: 72 g|ShippingList|Metal DC Geared Motor - 6V 15RPM...

This is a high quality metal servo horn. It fits Hitec standard servos, DF series servos and the Uptech CDS 5500 Servo.|Specification| Outside diameter: 20mm(0.79") Center hole diameter: 3mm(0.12")...

This is a high quality metal servo horn. It fits Hitec standard servos, DF series servos and the Uptech CDS 5500 Servo.|Specification| Outside diameter: 20mm(0.79") Center hole diameter: 3mm(0.12") Mounting holes: M3 Weight: 2g|Documents| Dimensions|ShippingList| Metal servo horn x1

This motor/ servo shield is for Micro: bit, it provides a simple way to add motor driving capability to a micro: bit. The shield can drive 2 motors, 2 servos, and allow the motors to be driven with...

This motor/ servo shield is for Micro: bit, it provides a simple way to add motor driving capability to a micro: bit. The shield can drive 2 motors, 2 servos, and allow the motors to be driven with forward, reverse, stop control. It?s easy to add the motor to the shield, and there is an integrated edge connector slot for your Micro: bit to slot into easily. The shield is powered by the battery, and the battery charged by the USB port. It makes easier to achieve the function of your Micro: bit...

RaspiRobot Board Description: The Raspberry Pi packs plenty of processing power in a small and inexpensive package and that makes it perfect for robot brains! The only problem? The Raspberry Pi may...

RaspiRobot Board Description: The Raspberry Pi packs plenty of processing power in a small and inexpensive package and that makes it perfect for robot brains! The only problem? The Raspberry Pi may have plenty of low-level hardware peripherals but motor controllers aren't one of them. That's why the RaspiRobot project got started. The RaspiRobot board is an expansion board for the Pi that turns it into a robot controller. The board comes as a kit of through-hole parts which is easy to...

"Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of maximum torque at 0.18 sec/60° This is a small...

"Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of maximum torque at 0.18 sec/60° This is a small servo with a standard 3 pin power and control cable (red = power, brown = ground, and yellow = data), and all hardware listed below. Features: Voltage: 4.8-6.0 Volts Torque: 38.8/44.4 oz-in. (4.8/6.0V) Speed: 0.20/0.18 sec/60° (4.8/6.0V) Rotation: 180° Dual Ball Bearing Metal Gears...