Products 1-29 of 29
Show
10Pin Female Header - 2.00mm (5pcs Pack)
Price: $1.67
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-CCO21002C -

    This is a pack which includes 5pcs 10 pin female header. We use this header on all our XBee series modules. They have 0.2mm spacing between pins. Specification Pin Pitch: 2.0mm Contact Qty: 10 Contact Type: Straight ...

2.54 mm Arduino Male Pin Headers (Straight Black 10pcs)
OOD!
Price: $5.00
View
Availability: Stocked
DFRobot Item #: FIT0084 -

This is a blue colored 40 Pin 2.54 mm?0.1"? single row pin header strip from DFRobot. These 0.1" header strips are commonly used as low-cost Arduino connectors. The standard spacing allows use with solderless breadboards, perforated prototyping PCBs, female headers, and our premium and pre-crimped jumper wires. The single-row header strips can easily be snapped into smaller strips to fit your application. These colored pin headers will help you label pin rails depending on their function. We...

40  Pin Break Away Male Header- Long Straight-10 Pcs
OOD!
Price: $8.71
View
Availability: Stocked
DFRobot Item #: FIT0105 -

These are a longer version of our standard break away headers. They are 10mm long which allows you use them socket to socket. The plastic separator can be slid up or down to accommodate your needs. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers. It is used on Arduino Ethernet Shield.|ShippingList| 40 Pin Header x10

40  Pin Break Away Male Header- Right Angle-10 Pcs
OOD!
Price: $5.00
View
Availability: Stocked
DFRobot Item #: FIT0100 -

A row of right angle headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.|ShippingList| 40 Pin Header x10

40Pin Bend Male Header - 2.54mm (5 Pcs Pack)
Price: $3.48
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-CCO24001C -

    This is a pack which includes 5pcs 40pin bend break away male headers. They have 2.54mm spacing between pins and can be cut to any size. Specification Pin Pitch: 2.54mm Contact Qty: 40 Contact Length: 6.3cm Contact Type: Bend ...

Alligator Clips - Large (Insulated)
Price: $3.39
View
Availability: Stocked
Sparkfun Item #: PRT-12020 -

"These Large Insulated Alligator Clips are great for clamping anything that you don’t want to deform yet large enough to easily manipulate. Thanks to the insulated flat surface, these clips can be used in a variety of applications such as, gripping small wires, coin cell battery, or large pads (like on our LilyPad boards). These clips offer an open clearance of a little over 8mm, two pan head screw terminals for wire connection, and a max current limit of 10A (theoretically). Sold in...

Arduino Female  Header-8 Pins- 10 Pcs
OOD!
Price: $3.28
View
Availability: Back Order
DFRobot Item #: FIT0104 -

This is a 8-pin female header which is used on Arduino board. |ShippingList| 8 Pin Header x10

Arduino Yun
Price: $156.41
View
Availability: Stocked
Sparkfun Item #: DEV-12053 -

"Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux). Arduino Yun is the first member of a new groundbreaking line of WiFi products combining the power...

Breadboard adapter for ESP8266 Serial-to-WiFi transceiver
Price: $7.58
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-CDD8266STW -

This is a breadboard adapter for the popular ESP-01 model of the ESP8266 serial-to-WiFi transceiver module. ESP8266 is an inexpensive Serial-to-WiFi tranceiver chip that can connect any microcontroller with a serial port to a WiFi network. Because of its simplicity and low cost, it is getting popular among hobbyists for building Internet of Things (IoT) applications. Out of many breakout boards available for ESP8266, ESP-01 model is the most popular one among hobbyists because it provides...

Breadboard Power Supply 5V/3.3V
Price: $7.84
View
Availability: Out of Stock
DFRobot Item #: DFR0140 -

This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard. It can be either powered from 6-12 DC2.1 power jack or from USB power.  The maximum current it can provide is 500mA.  Specification Input voltage: 6-12V (Power Jack) 5V (USB) Output voltage:3.3V/5V Output current:500mA On/Off switch Power status LED Pin Head 5/3.3V output Central positive DC2.1 power...

Break Away Headers - Machine Pin
OOD!
Price: $5.13
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: PRT-00117 -

"This is a very large row of high quality machine pin headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers. Why machine pin? Machine pins are round making better contact with IC sockets and connectors. Features: Pin Style: Machine Pins (Round) Number of Pins: 40 Pin Spacing: 0.1" (2.54 mm) "

Color RGB Header (40pcs)
OOD!
Price: $15.34
View
Availability: Back Order
DFRobot Item #: FIT0342 -

These customized colored pin headers are extensively used in DFRobot's product range. For instance, we are the first who uses 3 colors to clearly indicate the roles that pin headers play: green - digital; blue - analog; red - powerWe hope these tiny colorful pin headers help you in your own prototyping,PCB designing projects. Enjoy making! |Applications| Prototyping Arduino processor or shield female headers Custom pcb design|Specification| Pins are spaced by 0.1". Arduino processor R3 header...

Connector for e-paper display
Sale!
Price: $1.65
View
Availability: Back Order
Sparkfun Item #: PRT-10151 -

Connector for e-paper display Description: This is the 26-pin SMD connector that mates with our e-paper character displays. Documents: Datasheet

EasyUSB
Sale!
Price: $49.93
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: WIG-10155 -

EasyUSB Description: The EasyUSB gives your microcontroller access to 2MB that can be seen as a mass storage device in most operating systems. Now your microcontroller can easily read and write files in a file system that your computer can easily understand. Check the SDK below for examples and libraries. Features: FAT16 file system 2MB memory size 3.0-5.2V input voltage Baud rate: 9600 - 921600 bps DIP8 package Documents: Datasheet Programming Interface EasyUSB SDK ...

Electronics Blower Fan
OOD!
Price: $7.50
View
Availability: Back Order
DFRobot Item #: FIT0241 -

This is a 2 wire (+-) blower fan for all your cooling needs. |Specification| Supply voltage: DC 12V Current consumption: 0.3A|ShippingList| Blower Fan x1

FTDI Basic Breakout 3.3/5V (Arduino Compatible)
OOD!
Price: $22.24
View
Availability: Back Order
DFRobot Item #: DFR0065 -

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be...

JST connector Kit (2.54mm) (0.1)
OOD!
Price: $15.34
View
Availability: Back Order
DFRobot Item #: FIT0255 -

This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units). |Specification| Current rating:3A AC,DC (AWG #22) Voltage rating:250V AC,DC Temperature range?-25? to +85??including temperature rise in applying electrical current? Contact resistance?Initial value/10m &;Omega; max. After environmental testing/20m &;Omega; max. Insulation resistance?1000M &;Omega; min. Withstanding voltage?1000V AC/minute...

MiniMoto - DRV8830 Breakout
Sale!
Price: $11.98
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: BOB-11890 -

MiniMoto - DRV8830 Breakout Description: The MiniMoto is a great little breakout for the DRV8830 I2C DC motor driver. The MiniMoto is great for driving most small robotics. With an operating voltage range of 2.7V to 6.8V and a current limit of 1A the DRV8830 is a versatile little driver.  In addition to the benefit of being controlled via I2C, which frees up data lines and processing on the CPU to be used for other tasks, the MiniMoto has the lowest voltage output capability...

OpenLog
Price: $43.39
View
Availability: Stocked
Sparkfun Item #: DEV-09530 -

Description: The SparkFun OpenLog is an open source data logger. Simple to use, simple to change. We wanted to create a serial logger that just worked. Power up this device and it will start logging any received serial data at 9600bps. Sending Ctrl+z three times will drop out of logging and in to command mode. �new� will create a new file. �md� makes a directory. �?� brings up the list of commands. OpenLog doesn�t do a lot, but it does log serial streams extremely well. Example: >new...

Quick Disconnect - Female 1-5 (bag of 50)
Sale!
Price: $6.87
View
Availability: Stocked
Sparkfun Item #: PRT-11463 -

Quick Disconnect - Female 1/5 (bag of 50) Description: These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these standard connectors. These Female quick-disconnects are about 1/5" wide and can be crimped onto 16-14 AWG wire. Mating connectors can be found in the related items. Documents: Datasheet " ...

Quick Disconnect - Female 1/4" (bag of 50)
Sale!
Price: $6.87
View
Availability: Stocked
Sparkfun Item #: PRT-11461 -

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these standard connectors. These Female quick-disconnects are about ¼" wide and can be crimped onto 16-14 AWG wire. Mating connectors can be found in the related items. Documents: Datasheet " ...

Quick Disconnect - Male 1/4" (bag of 50)
Sale!
Price: $6.87
View
Availability: Stocked
Sparkfun Item #: PRT-11462 -

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these standard connectors. These Male quick-disconnects are about ¼" wide and can be crimped onto 22-16 AWG wire. Mating connectors can be found in the related items. Documents: Datasheet " ...

Quick Disconnect - Male 1/5" (bag of 50)
Sale!
Price: $6.87
View
Availability: Stocked
Sparkfun Item #: PRT-11464 -

"These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. There are also a variety of buttons and lights that use these standard connectors. These Male quick-disconnects are about 1/5" wide and can be crimped onto 22-16 AWG wire. Mating connectors can be found in the related items. Documents: Datasheet " ...

Screw Terminals 5mm Pitch - 2Pin (5pcs Pack)
Price: $1.67
View
Availability: Stocked
Elecrow Item #: EL-CCO10202C -

    This is a 2 Pole 5.0mm Screw Terminal Block.It includes 5 units of Terminal Block.There are screws which is tightened for a secure connection for both lugs and bare wire.      Specification Rated: 250,16A(250V,17.5A) Contact resistance: 200m? Max Insulation resistance: 5000M? Min Temp range: -30?~+120? Max Soldering: +260? 5s Wire range: 22-14AWG(1.5mm2) Strip length: 3.5mm ...

Screw Terminals 5mm Pitch - 3Pin (5pcs Pack)
Price: $1.99
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-CC010212C -

    This is a 3 Pole 5.0mm Screw Terminal Block.It includes 5 units of Terminal Block.There are screws which are tightened for a secure connection for both lugs and bare wire. Specification Rated: 250,16A(250V,17.5A)Contact resistance: 200m? MaxInsulation resistance: 5000M? MinTemp range: -30?~+120?Max Soldering: +260? 5sWire range: 22-14AWG(1.5mm2)Strip length: 3.5mm      ...

Serial Connector - Ribbon Cable (Female- 9-pin)
Sale!
Price: $3.39
View
Availability: Stocked
Sparkfun Item #: PRT-11157 -

Serial Connector - Ribbon Cable (Female, 9-pin) Description: DB9 connectors are a great way to make a tight connection on your project or to plug into existing serial lines. Now you can make your own DB9 cables the easy way with these crimp-on ribbon cable connectors. These work great with our 10-wire ribbon cable, you just need to peel back the one unneeded wire. Matching male connectors are available and can be found in the related items below. Includes: Male DB9 connector body Rear...

SparkFun ProtoSnap - Pro Mini
Sale!
Price: $52.08
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: DEV-10889 -

"The SparkFun ProtoSnap is an Arduino-compatible development platform aimed at teaching the basics of Arduino programming as efficiently as possible. It requires zero assembly, wiring, or soldering, so you can jump right into programming the ProtoSnap to control LEDs, buzzers, light sensors, and more. There’s even a small prototyping space so you can add your own parts! Once you’ve gotten a firm grasp of the programming, you can snap off the individual components of the ProtoSnap...

Tilt-a-Whirl Breakout - RPI-1031
Sale!
Price: $6.99
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: SEN-12011 -

Tilt-a-Whirl Breakout - RPI-1031 Description: The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This breakout board makes it easier to incorporate the RPI-1031 in your next project by breaking the necessary pins out to standard 0.1" spaced headers. This board will work at either 3.3 or 5V. Documents: Schematic Eagle Files Datasheet (RPI-1031) Product Page(RPI-1031) Hookup Guide bildr Tutorial Product...

WiiChuck Adapter (Arduino Compatible)
OOD!
Price: $3.28
View
Availability: Back Order
DFRobot Item #: DFR0062 -

The WiiChuck Adapter is a small PCB that is designed to be inserted into the connector of a Nintendo Wii Nunchuck to provide access to all 4 wires of the remote. The power, ground and two-wire interface of the Nunchuck are all broken out to a 4-pin 0.1" pitch header. Compared with standard WiiChuck, the DFRobot WiiChuck has extra 4 pins which allow you connect it to two devices. The Wii Nunchuck is loaded with features -- a 2-axis joystick, two buttons and a 3 axis ?2g accelerometer -- and any...