All Items
In Stock

Products 1-10 of 10
Show

915MHz LoRa Antenna RP-SMA - 1/2 Wave 2dBi

Back Order
Availability: Back Order
Item #: WRL-14876 -
Price: $16.53
Sparkfun

Increase your range with this 1/2 wave duck antenna. Designed for 860 to 960MHz it is ideal for distant LoRa nodes. Utilizes an RP-SMA connector and is 200mm long. Documents: 915MHz 1/2 Wave RP-SMA...

Increase your range with this 1/2 wave duck antenna. Designed for 860 to 960MHz it is ideal for distant LoRa nodes. Utilizes an RP-SMA connector and is 200mm long. Documents: 915MHz 1/2 Wave RP-SMA Antenna Datasheet

915MHz LoRa Antenna RP-SMA - 1/4 Wave 2dBi

Back Order
Availability: Back Order
Item #: WRL-14875 -
Price: $18.08
Sparkfun

A small 1/4 wave rubber duck antenna for LoRa or other 860-960MHz communication. Antenna has a center frequency of 915MHz and utilizes an RP-SMA connector. Gain is 2dBi with an overall length of...

A small 1/4 wave rubber duck antenna for LoRa or other 860-960MHz communication. Antenna has a center frequency of 915MHz and utilizes an RP-SMA connector. Gain is 2dBi with an overall length of 110mm.

LoRa 1W Breakout - 915M30S

Back Order
Availability: Back Order
Item #: SPX-18572 -
Price: $70.74
Sparkfun

Do you need power? This breakout for the 915M30S module from EBYTE is a 1W (30dBm) LoRa transceiver. LoRa is great for long range (miles), low power (in sleep), and low data rates (~500bps). This...

Do you need power? This breakout for the 915M30S module from EBYTE is a 1W (30dBm) LoRa transceiver. LoRa is great for long range (miles), low power (in sleep), and low data rates (~500bps). This breakout board is designed to connect to any platform that has SPI and 6 available GPIO. We include a robust edge mount RP-SMA connector to connect large LoRa (915MHz) antennas. In addition, the on-board U.FL connector can be used if you need to get outside a metal enclosure. We've successfully...

LoRa Transceiver Module (RFM95CW)

Out of Stock
Availability: Out of Stock
Item #: COM-18085 -
Price: $18.08
Sparkfun

RFM95CW is an ultra-low-power, high-performance LoRa transceiver for various frequency of 137-1020 MHz wireless applications. The high integration of RFM95C simplifies the peripheral materials...

RFM95CW is an ultra-low-power, high-performance LoRa transceiver for various frequency of 137-1020 MHz wireless applications. The high integration of RFM95C simplifies the peripheral materials needed in the system design. The sensitivity up to - 148 dBm which can optimize the link performance of applications. In addition, RFM95CW also supports Duty-Cycle operation mode, channel interception, high-precision RSSI, power-on reset, noise output and other more functions, which makes the application...

LoRa/FSK Transceiver Module - 915MHz (RFM97CW)

Back Order
Availability: Back Order
Item #: COM-18084 -
Price: $18.08
Sparkfun

RFM97CW Sub-GHz radio transceivers are ideal for long range wireless applications. With high integration, the RFM97CW simplifies the peripheral materials needed in system design. The sensitivity up...

RFM97CW Sub-GHz radio transceivers are ideal for long range wireless applications. With high integration, the RFM97CW simplifies the peripheral materials needed in system design. The sensitivity up to - 138dbm that optimizes link performance for applications. In addition, the RFM97CW also supports the function of duty cycle operation mode, channel listening, high-precision RSSI, power on reset, squelch output, etc., which makes the application design more flexible and realizes product...

Pycom Expansion Board 3.0

Out of Stock
Availability: Out of Stock
Item #: DEV-14675 -
Price: $55.50
Sparkfun

Your Pycom module will need some way to be programmed and that's exactly where this board comes in! The Pycom Expansion Board 3.0 allows you the means to create and connect new IoT projects with...

Your Pycom module will need some way to be programmed and that's exactly where this board comes in! The Pycom Expansion Board 3.0 allows you the means to create and connect new IoT projects with your WiPy 2.0, WiPy 3.0, LoPy, LoPy4, SiPy, FiPy, and GPy everywhere! With dozens of ready to use templates and libraries, developing a new IoT solution is now easier and faster. Each Expansion Board can be powered via micro USB or LiPo JST for 100mA or 450mA batteries and features a custom PIC USB to...

RFM97C Mini Shield LoRa - 100mW

Back Order
Availability: Back Order
Item #: SPX-18574 -
Price: $42.39
Sparkfun

The RFM97C is a great little module that incorporates the SX1276 LoRa transceiver from Semtech. LoRa is best for long range communication (hundreds of feet), low power, and low data rates (~500bps)....

The RFM97C is a great little module that incorporates the SX1276 LoRa transceiver from Semtech. LoRa is best for long range communication (hundreds of feet), low power, and low data rates (~500bps). This 'Mini Shield' is designed to be attached to the top or bottom of any of our Thing Plus boards. Pictured is the ESP32 Thing Plus. We include a PTH soldering point for a low cost wire antenna (~3" for 915MHz) along side a stress relief hole. For folks that need a bit more oomph, there is a U.FL...

SparkFun LoRa Thing Plus - expLoRaBLE

Back Order
Availability: Back Order
Item #: WRL-17506 -
Price: $97.20
Sparkfun

The SparkFun expLoRaBLE Thing Plus is a Feather-footprint development board with the NM180100 system in package (SiP), from Northern Mechatronics. Thanks to the NM180100, as well as the Ambiq...

The SparkFun expLoRaBLE Thing Plus is a Feather-footprint development board with the NM180100 system in package (SiP), from Northern Mechatronics. Thanks to the NM180100, as well as the Ambiq Apollo3 microcontroller and the Semtech SX1262 LoRa transceiver, this Thing Plus is a highly integrated LoRa® module supporting both 868MHz and 915MHz bands and Bluetooth® Low Energy. On top of all else, the expLoRaBLE Thing Plus utilizes our handy Qwiic Connect System which means no soldering or shields...

SparkFun MicroMod LoRa Function Board

Back Order
Availability: Back Order
Item #: WRL-18573 -
Price: $72.58
Sparkfun

The SparkFun MicroMod LoRa Function Board provides LoRA and LoRaWAN capabilities to your MicroMod project. It is intended to be used in conjunction with a MicroMod Processor Board and a MicroMod...

The SparkFun MicroMod LoRa Function Board provides LoRA and LoRaWAN capabilities to your MicroMod project. It is intended to be used in conjunction with a MicroMod Processor Board and a MicroMod Main Board, which provides the electrical interface between a processor board and the Function Board(s). The LoRa Function Board utilizes the 915M30S LoRa module from EBYTE, which is a 1W (30dBm) transceiver based around the SX1276 from Semtech. There is a robust edge mount RP-SMA connector for large...

SparkFun Pro RF - LoRa, 915MHz (SAMD21)

Back Order
Availability: Back Order
Item #: WRL-15836 -
Price: $61.68
Sparkfun

The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board. With its fast MCU and excellent point to...

The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board. With its fast MCU and excellent point to point data transmission in the 915MHz ISM band with LoRa Capabilities, the Pro RF is a great choice for anyone interested or experienced in utilizing long range data communication. Every pin on the SparkFun Pro RF is accompanied with a ground connection making the buttons and LEDs easy to connect. In...