Skip to main content
Your Saved For Later list is empty.
My Favorites

DC Motors and Gearmotors

Find DC motors and gearmotors for your robotics, automation, and electronics projects. Explore our range of drive components and mechanical parts.
Products 1-3 of 3
Show
Hobby Gearmotor - 65 RPM (Right Angle, Pair)
Price: $9.52 inc GST
$9.52 inc GST
Sparkfun

    These are a pair of right angle, hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your...

    These are a pair of right angle, hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors being at a right angle, you will also be able to track and control the rotation of your wheels! Each gearmotor requires a voltage of 3-6V with a no load current of 200mA while possessing a stall current of 3A@6V (1.5A@3V), a gearbox ratio of 48:1, and a wheel...

    Limited Stock
    Hobby Gearmotor - 140 RPM (Pair)
    Price: $8.92 inc GST
    $8.92 inc GST
    Sparkfun

      These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis and offer a cheap and easy-to-use setup to get your wheels turning. Each...

      These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis and offer a cheap and easy-to-use setup to get your wheels turning. Each Hobby Gearmotor also possess a 9mm long output on a straight axis. These gearmotors require a voltage of 4.5V with a no load current of 190mA while possessing a gearbox ratio of 48:1 and a wheel speed of 140 RPM unloaded. Every motor order is sold in packs of two. Note: The RPM listed in the...

      Limited Stock
      Hobby Motor - Gear
      Price: $3.46 inc GST
      $3.46 inc GST
      Sparkfun

        This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things like making a fan or spinning something pretty fast...

        This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things like making a fan or spinning something pretty fast without much resistance. The motor has a normal operating voltage range of 1.0 to 3.0VDC but can handle a max load of up to 12VDC and a no load speed of 6600±10% RPM (@1.0V DC, 110mA). More information is available in the spec sheet linked below. Note: Though the Datasheet for this Hobby Motor...

        Limited Stock