All Items
In Stock

Products 1-8 of 8
Show

Particle Photon (Headers)

Out of Stock
Availability: Out of Stock
Item #: WRL-13774 -
Price: $46.98
Sparkfun

Particle's IoT (Internet of Things) hardware development board, the Photon, provides everything you need to build a connected project. Particle has combined a powerful 120MHz ARM Cortex M3...

Particle's IoT (Internet of Things) hardware development board, the Photon, provides everything you need to build a connected project. Particle has combined a powerful 120MHz ARM Cortex M3 microcontroller with a Broadcom WiFi chip in a tiny thumbnail-sized module called the PØ (P-Zero). These specific Photons come with headers, making prototyping easy as each board can plug directly into standard breadboards and perfboards, and may also be mounted with 0.1" pitch female headers on a PCB. The...

SparkFun Photon Battery Shield

Back Order
Availability: Back Order
Item #: DEV-13626 -
Price: $31.38
Sparkfun

The SparkFun Photon Battery Shield provides you with an easy way to power your Photon module with a Lithium Polymer (LiPo) battery. Not only can the Battery Shield power your Photon, but you will...

The SparkFun Photon Battery Shield provides you with an easy way to power your Photon module with a Lithium Polymer (LiPo) battery. Not only can the Battery Shield power your Photon, but you will also be able to charge a LiPo battery through it. The board comes with a JST connector for your single-cell LiPo battery and utilizes the Photon's on-board micro-USB connector for the charge input. This battery shield uses a MCP73831 for LiPo charging and a MAX1704X for fuel gauging. This is a very...

SparkFun Photon IMU Shield

Back Order
Availability: Back Order
Item #: DEV-13629 -
Price: $39.85
Sparkfun

This is the SparkFun Photon IMU Shield, a versatile motion-sensing add-on board for your Photon device. Each IMU shield is equipped with an on-board LSM9DS1 system-in-a-chip that houses a 3-axis...

This is the SparkFun Photon IMU Shield, a versatile motion-sensing add-on board for your Photon device. Each IMU shield is equipped with an on-board LSM9DS1 system-in-a-chip that houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer. That's right, 9 degrees of freedom (9DOF) from a single IC! Each sensor in the LSM9DS1 supports a large variety of ranges: the accelerometer’s scale can be set to ± 2, 4, 6, 8, or 16 g, the gyroscope supports ± 245, 500, and 2000 °/s, and the...

SparkFun Photon Micro OLED Shield

Back Order
Availability: Back Order
Item #: DEV-13628 -
Price: $36.04
Sparkfun

The SparkFun Photon Micro OLED Shield breaks out a small monochrome, blue-on-black OLED to use with your Photon module. It’s "micro", but it still packs a punch – the OLED display is crisp, and you...

The SparkFun Photon Micro OLED Shield breaks out a small monochrome, blue-on-black OLED to use with your Photon module. It’s "micro", but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. This shield is perfect for adding graphics to your Photon, displaying diagnostic information without resorting to serial output, and teaching a little game theory. Speaking of, the screen on this breakout is only 64 pixels wide and 48 pixels...

SparkFun Photon ProtoShield

Back Order
Availability: Back Order
Item #: DEV-13598 -
Price: $4.76
Sparkfun

You can't have any development board without some sort of prototyping area, the SparkFun Photon ProtoShield takes care of this. This ProtoShield mates easily with your Photon module and provides a...

You can't have any development board without some sort of prototyping area, the SparkFun Photon ProtoShield takes care of this. This ProtoShield mates easily with your Photon module and provides a small soldering area and separated power and I2C hook-ups. With the SparkFun Photon ProtoShield you have the control over what kind of project you design for your Photon. The Particle Photon is a tiny WiFi development kit for creating connected projects and products. Sporting a 120MHz ARM Cortex M3...

SparkFun Photon RedBoard

Back Order
Availability: Back Order
Item #: DEV-13321 -
Price: $79.79
Sparkfun

The SparkFun Photon RedBoard, to put it simply, is a WiFi/Microcontroller development board in the Arduino form-factor for the Photon. It's easy to use, it's powerful, and it's connected to the...

The SparkFun Photon RedBoard, to put it simply, is a WiFi/Microcontroller development board in the Arduino form-factor for the Photon. It's easy to use, it's powerful, and it's connected to the cloud. With the best support, potential, and performance the Photon RedBoard provides you with an IoT device with a powerful 120MHz ARM Cortex M3 and built-in WiFi connectivity. Imagine blowing up a Photon into the shape of an Arduino and while keeping its wireless and ARM Cortex M3 capabilities, the...

SparkFun Photon Weather Shield

Back Order
Availability: Back Order
Item #: DEV-13674 -
Price: $42.80
Sparkfun

The SparkFun Photon Weather Shield is an easy-to-use add-on board that grants you access to barometric pressure, relative humidity, and temperature. There are also connections on this shield to...

The SparkFun Photon Weather Shield is an easy-to-use add-on board that grants you access to barometric pressure, relative humidity, and temperature. There are also connections on this shield to optional sensors such as wind speed, direction, rain gauge and soil readings! These Weather Shields utilize the Si7021 temperature/humidity and MPL3115A2 barometric pressure sensors. Each shield comes with two RJ11 connectors (for optional hookup of rain and wind sensors) and a 3-pin soil temperature...

SparkFun Qwiic Shield for Photon

Back Order
Availability: Back Order
Item #: DEV-14477 -
Price: $12.36
Sparkfun

The SparkFun Qwiic Shield for Photon is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Particle Photon. This shield connects the I2C bus on...

The SparkFun Qwiic Shield for Photon is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Particle Photon. This shield connects the I2C bus on your Photon to a series of SparkFun Qwiic connectors. As long as your devices are on different addresses, the Qwiic system allows for daisy chaining, meaning you can stack as many sensors as you’d like to create a tower of sensing power! The Qwiic Shield has four Qwiic connection ports, all on the...