Ultimaker 3D Printers

Front Panel UM2 For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Front Panel UM3 Xtd For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Getting Started Sheet UM3 For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Getting Started Sheet UM3 ext For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Ultimaker Grease for maintenance on all your Ultimaker machines (not to be used on the Ultimaker 3, or Ultimaker 3 Extended).**This grease to be only used on the Z threaded rod only. Never use this on a smooth rod**

Header Cable Clip For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Heater Cartridge 18V 40W For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Official Ultimaker Spare Part for the Ultimaker 2 and 2 Extended only. This 24V, 25W cartridge fits into the integrated nozzle/block on the print head.This will work on the UM2 Go, but has a longer cable than is normally used.

Official Ultimaker Spare Part for Ultimaker 2+ and Extended+ printers. This cartridge is 24V, 35W.This is not compatible with the (non-Plus) Ultimaker 2, or Ultimaker 2 Extended models, nor with the Ultimaker Original/+ or Ultimaker 2Go printers.

Hex Screwdriver 2mm For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Hexagon Spacer, White, M3x6x12 For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Hot End Cooling Fan for the Ultimaker 2 Family.This fan is compatible with the following machines -Ultimaker 2, Ultimaker 2 Extended, Ultimaker 2+, Ultimaker 2+ Extended and the Ultimaker 2 Go.

This is the Ultimaker 2 hot end isolator. It is the connection between the PTFE coupler and the nozzle + heater block. It is also included in the Ultimaker 2 hot end bundle. This part is compatible with the Ultimaker 2, Extended and Ultimaker 2+ and Extended.

Hot End Isolator Coupler For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Hot End Isolator Tube For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Injection moulding set For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

ISO 7040 Nut M3 Prev. Torque A2 For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Lasercut drawing Ulticontroller For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

LED Strip Cold White For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Left Panel UM2 For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Left Panel UM3 Xtd For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Lifting Ring For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Lifting Ring Bottom For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Lifting Switch For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Ultimaker 2 family Z-axis endstop limit switch, with short black wire.This is compatible with the following machines -Ultimaker 2, Ultimaker 2 Extended, Ultimaker 2+, Ultimaker 2+ Extended, Ultimaker 2 Go and the Ultimaker Original.

Limit Switch Blue Wire For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Limit Switch Red Wire For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Ultimaker 2 family X-Axis end stop switch (Blue wire)This is compatible with the following machines -Ultimaker 2, Ultimaker 2 Extended, Ultimaker 2+, Ultimaker 2+ Extended, Ultimaker 2 Go and the Ultimaker Original

Ultimaker 2 family Y-Axis end stop switch (Red wire)This is compatible with the following machines -Ultimaker 2, Ultimaker 2 Extended, Ultimaker 2+, Ultimaker 2+ Extended, Ultimaker 2 Go and the Ultimaker Original

Machine Oil For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

All you need for sure adhesion of 3D prints Magigoo is an easy to use 3D printing adhesive designed to address 'the first layer not sticking problem'. Magigoo ensures a strong adhesion to the hot plate. But the magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a finger flick! In addition, Magigoo helps to prevent warping. Isn't it magic? Regardless of you being a hobbyist or professional - it is extremely rewarding to have a 30...

Magigoo Flex  WHAT: MAGIGOO Flex is designed for professional use, to work exclusively with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off. WHY:  TPUs, TPEs/TPCs describe a group of polymers which are sometimes referred to as thermoplastic rubbers. Thermoplastic rubbers exist as co-polymers or a polymer blend,...

Magigoo Metal for Ultrafuse 316L WHAT: MAGIGOO Metal is designed as a professional first layer adhesive with BASF Ultrafuse® 316L. Magigoo Metal is non-hazardous, non-flammable and also approved for use in post processing stages of BASF Ultrafuse® 316L. Magigoo Metal also enables easy part removal of the green parts from the build-plate. WHY: BASF Ultrafuse 316L enables the production of solid 316L-grade stainless steel parts through the use of desktop FDM 3D printers and a sintering process....

Magigoo PA  WHAT: MAGIGOO PA is designed for professional use, to work exclusively with Polyamide filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off. WHY:  PA (polyamide) describes a group of polymers with an amide repeat unit. Generally in the FDM industry there are 3 main types of PA which include PA12, PA6,6 and PA6, sometimes these materials can be either grafted with other polymers or else reinforced with...

Magigoo PC WHAT:  MAGIGOO PC is designed to work exclusively with polycarbonate type filaments. This adhesive for professional use makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the bed cools down. WHY:  The strength and toughness of PC make it an ideal FDM material for the production of functional...

Magigoo PP  WHAT: MAGIGOO PP is designed for professional use, to work exclusively with polypropylene filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off if the included procedure is followed. WHY:  Polypropylene (PP) is a thermoplastic semi-crystalline polymer exhibiting properties of good impact resistance and ductility. It also has a relatively non-polar molecular structure which makes it chemical resistant...

Magigoo PP-GF WHAT: Magigoo PP-GF is designed to work exclusively with glass re-insforced polypropylene(GFPP) filaments.This adhesive makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. WHY: Polypropylene (PP) is a thermoplastic semi-crystalline polymer exhibiting properties of good strength, impact resistance and ductility making it useful as an engineering material. PP however is a soft material and like most plastics it can be...

Magnalube Reclosable For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Main Board Electronics Cover For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Main Cable For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Model Cooling Fan for the Ultimaker 2 Family.This fan is compatible with the following machines -Ultimaker 2, Ultimaker 2 Extended, Ultimaker 2+, Ultimaker 2+ Extended and the Ultimaker 2 Go.

Nozzle for Ultimaker Original. For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Nut M8 For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Nuts & Bolts Pack For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Olimex Board Assembly UM3 For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Olimex Board Assembly UM3 Extended For all Ultimaker parts reach out to the team at MindKits for some help. Contact us via Online Chat or Email

Olsson Nozzle 0.25Compatible with:Ultimaker 2+Ultimaker 2 Extended+This can be used on the Ultimaker 2 if you have installed the UpGrade Kit to convert your machine to a Ultimaker 2+.

Olsson Nozzle 0.4Compatible with:Ultimaker 2+Ultimaker 2 Extended+This can be used on the Ultimaker 2 if you have installed the UpGrade Kit to convert your machine to a Ultimaker 2+.