Products 2977-3024 of 3179
Show
TMC260 Stepper Motor Driver Shield  For Arduino
OOD!
Price: $49.99
View
Availability: Back Order
DFRobot Item #: DRI0035 -

This is a stepper motor driver introduced by DFRobot for those projects require powerful stepper motors, such as a pair of automatic curtains, an XY Plotter. This shield allows Arduino drive stepper motors (up to 2A per motor coil, 40V max). This stepper motor drive shied adoptes a TMC260 chip which is the first energy efficient high precision microstepping driver IC for bipolar stepper motors with integrated power MOSFETs. The unique high resolution sensorless load detection...

Toggle Switch
Price: $3.46
View
Availability: Stocked
Sparkfun Item #: COM-09276 -

This is a heavy duty SPST toggle switch - your basic on/off toggle. Rated for 2A at 250V or 4A at 125V. Includes a face plate and two threaded nuts for mounting. Works great with our missile switch cover. Features: 0.5 x 0.55 x 1.45" Documents: Dimensional Drawing

Toggle Switch and Cover - Illuminated (Red)
Price: $5.32
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: COM-11310 -

This simple on-off switch is rated for 20A at 12V but who cares about all that, it looks way awesome. These toggle switches come with those missile switch covers that make your project look like something out of a spy movie. They're also a great safety feature to ensure that you don't accidentally fire the missiles (or whatever it is your switch does). As if you needed any more convincing, they're also illuminated with a small LED in the end of the switch. These can be panel mounted into a...

Tool Kit - Screwdriver and Bit Set
OOD!
Price: $16.35
View
Availability: Back Order
Sparkfun Item #: TOL-10865 -

There's nothing worse than getting ready for a good hack and then realizing that you can't even get the box open because you don't have the right screwdriver. Sure, we all have a few Phillips-head drivers and maybe a few slotted drivers but what about Torx, Hex Socket or Tri-Wing? This kit has them all. Along with a large variety of interchangeable bits and a hard ABS plastic handle, the kit also includes a steel extension bar and a flexible extension neck that really comes in handy when...

Tower Pro 9g SG-90 Mini Servo
Price: $9.35
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-RMS09001S -

    Tower Pro SG90 is a high quality, low-cost servo for all your mechatronic needs. It comes with a 3-pin power and control cable, mounting hardware. Specification Operating Voltage: 4.8 ~ 6.0V Operating Speed: 0.12sec/60 degree(4.8V)~0.1sec/60 degree(6.0V) Torque: 1.6kg/cm(4.8V) Dead Band Width: 5usec Temperature Range: -30?~+60? Cable Length: 25cm Brand name: Tower Pro location of each pin: red (+), brown (-), yellow (signal). ...

Tower Pro SG-5010 Servo
Price: $20.01
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-RMS05010S -

    Tower Pro SG5010 is a high quality but really low-cost servo for all your mechatronic needs. It comes with a 3-pin power and control cable, even a dozen of hardware as shown. Features 3 pole ferrite, all nylon gear. Top ball bearing location of each pin: red (+),brown (-), yellow (signal). Specification Operating Voltage: 4.8~6.0V Operating Speed: 0.20sec/60 degree(4.8V)~0.16sec/60 degree(6.0V) Torque: 5.2kg/cm(4.8V)~6.5Kg/cm(6.0V) Dead Band Width: 4usec Temperature...

TowerPro SG90C 360 Degree Micro Servo (1.6Kg)
OOD!
Price: $6.72
View
Availability: Back Order
DFRobot Item #: SER0043 -

The TowerPro SG90C is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various applications and DIY products, such as toy cars, boats, windmills etc. A 360 degree servo’s operation is more similar to a DC motor than a standard servo as only rotation direction and speed can be controlled. There is also no hardware stop inside so that the shaft can rotate freely. Compared to an ordinary DC motor, a 360-degree servo motor does not require...

Transceiver nRF2401A Module Trace Antenna
Sale!
Price: $23.96
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: WRL-00153 -

Transceiver nRF2401A Module Trace AntennaDescription: Miniature RF (MiRF) 2.4GHz transceiver modules with built in antenna designed around the Nordic Semiconductor nRF2401A with high sensitivity and good range. These units are a SparkFun exclusive; small in stature, big on performance, all wrapped up in a user friendly package. Units come with an empty 0.1" spaced footprint ready for a straight header, right angle header (recommended), or your own wires/umbilical cable.The...

Transistor -  NPN, 60V 4A (2N5192G)
OOD!
Price: $2.09
View
Availability: Back Order
Sparkfun Item #: COM-13951 -

This is the 2N5192G, an NPN silicon transistor. This little transistor can help in your project by being used to help drive large loads or amplifying or switching applications. The 2N5192G is specifically rated at 60V and 4A max. Documents: Datasheet

Transistor - NPN, 60V 200mA (2N3904)
Price: $0.82
View
Availability: Out of Stock
Sparkfun Item #: COM-00521 -

These are very common, high quality BJT NPN transistors made by ST Micro. Datasheet: 2N3904

Transistor - PNP (2N3906)
OOD!
Price: $0.82
View
Availability: Back Order
Sparkfun Item #: COM-00522 -

These are very common, high quality BJT, PNP transistors made by ST Micro. **Datasheet: **2N3906

Transparent Acrylic Case with Cooling fan and Heatsink for Pi B+/2B/3B
OOD!
Price: $6.72
View
Availability: Back Order
DFRobot Item #: FIT0540 -

The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explore computing, and to learn how to program in languages like Scratch and Python. It’s capable of doing everything you’d expect a desktop computer to do, from browsing the internet and playing high-definition video, to making spreadsheets, word-processing, and playing...

Transparent Acrylic Shell for Micro: bit Development Board
Price: $4.17
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-DTS10005S -

It is a cost-effective shell for your Micro: bit development board. The shell has a transparent acrylic body, which can allow you see the inside clearly. It can be assembled yourselves, and there is no lock, so it is easy to assemble. It is designed for Micro: bit development board, the high practical value and beautiful looking can be a great choice for you. Specifications Color: transparent Size: 33x86mm Material: acrylic Package list Transparent Acrylic Shell for Micro: bit x 1 ...

Transparent Plastic Enclosure for Raspberry Pi B+/2B/3B
OOD!
Price: $8.45
View
Availability: Back Order
DFRobot Item #: FIT0391-T -

The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explore computing, and to learn how to program in languages like Scratch and Python. It’s capable of doing everything you’d expect a desktop computer to do, from browsing the internet and playing high-definition video, to making spreadsheets, word-processing, and playing...

Trimpot 10K Ohm with Knob
Price: $2.28
View
Availability: Stocked
Sparkfun Item #: COM-09806 -

There are lots of trimpots out there. Some are very large, some so small they require a screwdriver. Here at SparkFun, we just needed a simple one that worked. This 10K trimmable potentiometer has a small knob built right in and it's breadboard friendly to boot! Perfect for your next LCD contrast adjuster, opamp setting, or volume level. This model # is TSR-3386U within the datasheet. Documents: Datasheet (Note pins are in a single row, as shown in the pictures) ...

Triple Axis Accelerometer - ADXL335
OOD!
Price: $16.35
View
Availability: Back Order
Sparkfun Item #: COM-09265 -

The ADXL335 is a small, thin, low power, complete 3-axis MEMS accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration. The user selects the bandwidth of the accelerometer using the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins. Bandwidths can be selected...

Triple Axis Accelerometer - ADXL345
OOD!
Price: $16.35
View
Availability: Back Order
Sparkfun Item #: SEN-09045 -

The ADXL345 is a small, thin, low power, three-axis MEMS accelerometer with high resolution (13-bit) measurement up to ±16g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4mg/LSB)...

Triple Axis Accelerometer ADXL345
OOD!
Price: $13.62
View
Availability: Back Order
DFRobot Item #: SEN0032 -

Breakout board for the Analog Device ADXL345. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to &;plusmn;16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited to measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high...

Triple Axis Accelerometer BMA220 (Tiny)
OOD!
Price: $8.45
View
Availability: Back Order
DFRobot Item #: SEN0168 -

This Triple Axis Accelerometer with Bosch BMA220 is an ultra small triaxial, low-g acceleration sensor breakboard with SPI and I2C interface, aiming for low power consumer market applications. It allows measurement of accelerations in 3 perpendicular axes and thus senses tilt, motion, shock and vibration in cell phones, handhelds, computer peripherals, man-machine interfaces, virtual reality features and game controllers. With a size of only 2 mm x 2 mm, the Bosch BMA220 represents a new...

Triple Axis Accelerometer Breakout - LIS2DH12 (Qwiic)
OOD!
Price: $14.84
View
Availability: Back Order
Sparkfun Item #: SPX-15760 -

Qwiic has struck again! This MEMS, three axis accelerometer by STMicroelectronics has been outfitted to communicate over Qwiic. The LIS2DH12 is an ultra-low-power highperformance three-axis linear accelerometer belonging to the “femto” family with digital I2C/SPI serial interface standard output. The LIS2DH12 has user-selectable full scales of ±2g/±4g/±8g/±16g and is capable of measuring accelerations with output data rates from 1 Hz to 5.3 kHz. The accelerometer features ultra-low power...

Triple Axis Accelerometer Breakout - MMA7361
Price: $10.90
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-SPS07361S -

    This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ?1.5g and ?6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and 0g-detect which detects linear freefall. Zero-g offset and sensitivity are factory set and require no external devices....

Triple Axis Accelerometer FXLN8361
OOD!
Price: $26.72
View
Availability: Back Order
DFRobot Item #: SEN0178 -

3-Axis acceleration sensor is an electronic equipment which could measure the acceleration during the object motion. It could help you to analyse the target motion position or direction. The typical interactive application could be the posture recognition and action recognition, such as WII game applications. These video game device are all using internal acceleration sensor, calculate the current motion direction by conversion algorithm. And most of the recent smart device are based the same...

Triple Axis Accelerometer MMA7260
Price: $30.31
View
Availability: Out of Stock
DFRobot Item #: DFR0068 -

Triple Axis Accelerometer MMA7260 The MMA7260Q is a very nice sensor with easy analog interface. The MMA7260QT is a 3.3V part and outputs an analog voltage for each of the three outputs. This voltage is in ratio to the measured acceleration and to the supply voltage (ratiometric). It has selectable sensitivity by dip switch.  You will need some extra hardware to convert this analog signal to a usable digital one.  The Arduino is really good option for it.  This break...

Triple Axis Accelerometer MMA7361
OOD!
Price: $25.86
View
Availability: Back Order
DFRobot Item #: DFR0143 -

The MMA7361 from Freescale is a very nice IMU sensor with easy analog interface. The MMA7361 Arduino is a 3.3V part and outputs an analog voltage for each of the three outputs. This voltage is in ratio to the measured acceleration and to the supply voltage (ratiometric). It has selectable sensitivity by dip switch. You will need some extra hardware to convert this analog signal to a usable digital one. The Arduino is really good option for it. This break board is especially designed for...

Triple Output High Power RGB LED
OOD!
Price: $8.63
View
Availability: Back Order
Sparkfun Item #: COM-15200 -

So much power and light from such a small package. This 3W per channel, Triple Output High Power RGB LED is sure to shed a lot of light on any project you add it to. This LED acts as any other LED except they require much more power while delivering a light as intense of a thousand suns going super nova (this is an exaggeration but you know what we mean)! Please be aware that with all three LEDs (9W total output), you will need additional heat sinking. This LED sits upon an aluminum backed PCB...

Triple Output LED RGB - SMD
OOD!
Price: $3.70
View
Availability: Back Order
Sparkfun Item #: COM-07844 -

This is the very popular RGB combo but in SMD form. These units have four pads with a common anode configuration. Use this one LED for three status indicators or pulse width modulate all three and get mixed colors! Simple breakout board available below. Iv (Typical): Red: 81mcd Green: 130mcd Blue: 54mcd Vf (Typical): Red: 2.0V Green: 3.5V Blue: 3.5V Wavelength (λD - nm): Red: 615nm Green: 530nm Blue: 470nm Documents: Datasheet LED Tutorial ...

TRRS Audio Plug - 3.5mm (Metal)
OOD!
Price: $1.85
View
Availability: Back Order
Sparkfun Item #: COM-15337 -

TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for "Tip, Ring, Ring, Sleeve," which reflects the fact that, unlike a standard stereo connector, this actually has three conductors and a ground. Some devices use the extra conductor for a microphone (like hands-free headsets) or to carry a video signal (like in some MP3/MP4 players). If you're hacking on something that has a 4-conductor audio jack, being able to plug...

TRS Audio Plug - 3.5mm (Metal)
OOD!
Price: $1.85
View
Availability: Back Order
Sparkfun Item #: COM-15438 -

TRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRS stands for "Tip, Ring, Sleeve." If you're hacking on something that has a three-conductor audio jack, being able to plug straight in will keep your build clean and simple. Note: This plug allows you to add a custom length of wire to your connector or repair a broken shroud on an existing cable you just cannot live without. Unfortunately, the supplier has not provided a datasheet...

Tsunami Super WAV Trigger (Qwiic)
OOD!
Price: $138.82
View
Availability: Back Order
Sparkfun Item #: WIG-18159 -

Based on a new generation ARM Cortex M7, the Qwiic Tsunami Super WAV Trigger extends polyphony to 32 mono or 18 stereo simultaneous uncompressed 44.1kHz, 16-bit tracks. Each track can start, pause, resume, loop and stop independently, and can have its own volume setting, allowing you to create the perfect interactive mix of music, dialog and sound effects. The Qwiic Tsunami also supports true seamless looping over an arbitrary track length. Utilizing our handy Qwiic system, no soldering is...

TT Geared Motor with Back Shaft (160rpm 6v L Shape)
OOD!
Price: $6.03
View
Availability: Back Order
DFRobot Item #: FIT0016 -

This is a TT Micro DC Geared Motor with Back Shaft working at 6V with 160rpm. The TT motor series the most popular DC motors for DIY enthusiasts. It is designed to easily incorporate the DFRobot Encoder. These motors are inexpensive, small, easy to install, and ideally suited for use in a mobile robot. The DFRobot ROMEO microcontroller is able to complete the closed-loop PID making use of the Gravity:TT Motor Encoders Kit. We recommend this rubber wheel for this motor. |Specification|Electrical...

Tube - Aluminum (1"OD x 16"L x 0.82"ID)
Price: $11.43
View
Availability: Out of Stock
Sparkfun Item #: ROB-12356 -

These 16" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Features: Length - 16.0" OD - 1" ID - 0.82" Width - 0.09"

Tube - Aluminum (1"OD x 2.0"L x 0.82"ID)
OOD!
Price: $2.54
View
Availability: Back Order
Sparkfun Item #: ROB-12520 -

These 2" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Features: Length - 2.0" OD - 1" ID - 0.82" Width - 0.09"

Tube - Aluminum (1"OD x 24"L x 0.82"ID)
Price: $19.63
View
Availability: Out of Stock
Sparkfun Item #: ROB-12173 -

These 24" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Features: Length - 24.0" OD - 1" ID - 0.82" Width - 0.09"

Tube - Aluminum (1"OD x 4.0"L x 0.82"ID)
Price: $3.42
View
Availability: Stocked-NoBackOrder
Sparkfun Item #: ROB-12460 -

These 4" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Features: Length - 4.0" OD - 1" ID - 0.82" Width - 0.09"

Tube - Aluminum (3/8"OD x 10"L x 0.30"ID)
OOD!
Price: $6.68
View
Availability: Back Order
Sparkfun Item #: ROB-12215 -

These 10" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Features: Length - 10.0" OD - 3/8" ID - 0.30" Width - 0.035"

Tube - Aluminum (3/8"OD x 8.0"L x 0.30"ID)
Price: $5.50
View
Availability: Out of Stock
Sparkfun Item #: ROB-12101 -

These 8" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Features: Length - 8.0" OD - 3/8" ID - 0.30" Width - 0.035"

Tube - Stainless (1"OD x 10"L x 0.88"ID)
Price: $17.41
View
Availability: Out of Stock
Sparkfun Item #: ROB-12217 -

These 10" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Features: Length - 10.0" OD - 1" ID - 0.88" Width - 0.06"

Tube - Stainless (1"OD x 12"L x 0.88"ID)
Price: $20.48
View
Availability: Out of Stock
Sparkfun Item #: ROB-12253 -

These 12" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Features: Length - 12.0" OD - 1" ID - 0.88" Width - 0.06"

Tube - Stainless (1"OD x 2.0"L x 0.88"ID)
Price: $5.10
View
Availability: Out of Stock
Sparkfun Item #: ROB-12208 -

These 2" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Features: Length - 2.0" OD - 1" ID - 0.88" Width - 0.06"

Tube - Stainless (1"OD x 8.0"L x 0.88"ID)
Price: $13.99
View
Availability: Out of Stock
Sparkfun Item #: ROB-12547 -

These 8" long stainless steel tubes have an outer diameter of 1", an inner diameter of 0.88", and a wall thickness of 0.06". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Features: Length - 8" OD - 1" ID - 0.88" Width - 0.06"

Tubing - Aluminum (5/8"OD x 10"L x 0.569"ID)
OOD!
Price: $8.65
View
Availability: Back Order
Sparkfun Item #: ROB-12254 -

These 10" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Features: Length - 10.0" OD - 5/8" ID - 0.569" Width - 0.028"

Tubing - Aluminum (5/8"OD x 6.0"L x 0.569"ID)
Price: $6.28
View
Availability: Out of Stock
Sparkfun Item #: ROB-12236 -

These 6" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the mating tube clamps, these can be used for versatile structural support. Additionally, wires and cables can easily be run through the center. Features: Length - 6.0" OD - 5/8" ID - 0.569" Width - 0.028"

Turnigy 2000mAh 1S 1C Lipo w/ 2 Pin JST-PH Connector
Price: $14.43
View
Availability: Stocked-NoBackOrder
HobbyKing Item #: MK-9067000191-0 -

Turnigy batteries are known the world over for performance, reliability and a household name in the RC community. It’s no surprise to us that Turnigy Lipo packs are the choice for those in the know. Turnigy batteries deliver their promises of full capacity, performance and at a price everyone can agree with. You will not find a better deal in Lipo batteries anywhere!Features:• Performance and reliability• Trusted name in the RC community• Great value for the price• Made from quality components...

Turnigy nano-tech 950mah 1S 25~50C Lipo Pack (Walkera V120, X100)
Price: $10.87
View
Availability: Stocked-NoBackOrder
HobbyKing Item #: MK-9210000004 -

Finally, a nano-tech has arrived for your Walkera V120 and X100 helicopters. Boost the performance of your machine with this 1S 950mAh 25-50C high power Lipo.The Turnigy nano-tech round single series cells are the perfect solution for many applications where space and weight are at a premium. These round Lipoly cells can be soldered together to make custom packs to suit your needs.More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious...

Turtle Kit: A 2WD DIY Arduino Robotics Kit For Beginner
OOD!
Price: $170.66
View
Availability: Back Order
DFRobot Item #: ROB0118 -

The Turtle 2WD DIY Robotics building kit is a entry level programmable robot kit based on Arduino.With just a few simple steps of assembling the hardware and tuning the software, and you'll learn all about Arduino, robotics, sensors, bluetooth communication — as well as obstacle avoidance and remote controlling. You can also take it further with your own code to take advantage of the ultrasonic sensor, Romeo ( a Bluetooth 4.0 (BLE) Arduino Microcontroller ) , IR distance sensors and...

Turtle: 2WD Arduino Mobile Robot Platform
OOD!
Price: $60.16
View
Availability: Back Order
DFRobot Item #: ROB0005 -

The 2WD Mobile Robot Platform for Arduino is a small, low-cost mobile platform for use with a standard Arduino microcontroller. The robot comes as a kit which includes two drive motors, wheels (and rear caster ball), frame and all mounting hardware. The main structure and mechanical parts for a robot.This DFRobot mobile robot platform is widely used as self-developed control chasis for Arduino platforms and other control boards. This kit features the following: two differential drives, near...

Tweezers - Curved (cross-lock, ESD Safe)
Price: $7.13
View
Availability: Stocked
Sparkfun Item #: TOL-12572 -

These are nice, cross-locking, curved tweezers, unlike traditional models the tips on these tweezers will remain closed until squeezed open. They have a nice, rounded tip which allows you to pick up very small parts with precision. This is a great tool to have if you're working with surface mount components or anything with very small parts. The ESD-safe coating will also help prevent electro-static damage to sensitive electronic components. Documents: Product Video ...

Tweezers - Curved (ESD Safe)
Price: $7.00
View
Availability: Stocked
Sparkfun Item #: TOL-10602 -

You can tell by our large assortment of tweezers that we here at SparkFun are way into picking up tiny things. To make sure we're always up to date on the latest in 'tweezing' technology, we're always buying and testing new tweezers. Okay... tweezers aren't exactly the most exciting thing in the world, but they are super handy. These are nice, solid curved tweezers. They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool to have if you're...