Products 3265-3288 of 3288
Show
XBee-PRO 900HP S3B RPSMA Antenna
OOD!
Price: $101.79
View
Availability: Back Order
DFRobot Item #: TEL0021 -

Digi International XBee-PRO 900HP RF Modules enjoys proven reputation in wireless devices connectivity. They benefit from the DigiMesh networking protocol, feature dense network operation and support for sleeping routers. and are also available in a proprietary point-to-multipoint configuration. Supporting RF line-of-sight ranges up to 9 miles (with high-gain antennas), and data rates of up to 200Kbps, these modules are ideal for extended-range applications requiring increased data...

XBee-PRO S2C ZigBee Module (U.FL)
OOD!
Price: $72.23
View
Availability: Back Order
DFRobot Item #: TEL0004 -

This is the XBee PS2CTH ZigBee module with U.FL antenna interface. It improves on the transmit power and data protocol which allows you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported. The XBee-PRO S2C module has a uniform pin map with other XBee modules, which means you...

XBoard V2 -A Bridge Between Home And Internet (Arduino Compatible)
OOD!
Price: $34.30
View
Availability: Back Order
DFRobot Item #: DFR0162 -

This is Version 2.0 of the Xboard. The main improvement is that it now operates at 5V, making it compatible with most sensors and I2C protocol without the need of a voltage level converter. The XBoard is a unique Arduino board which features a WIZnet ethernet port, an XBee socket, and an ATMega328. This board will add wireless XBee control as well as internet connectivity to your projects. It's great for anything from home automation to robot control. The possibilities are endless! It has 8...

Xcelite 8-in-1 Screwdriver Set
OOD!
Price: $49.54
View
Availability: Back Order
Sparkfun Item #: TOL-14235 -

The Xcelite 8-in-1 Screwdriver Set provides eight high-quality bits in a single ergonomic tool. Each bit is easily accessible with a spring-loaded magnetic housing that holds the seven included bits you aren't currently using. Though the screwdriver set includes eight unique bits, the end of the shaft features a 0.25" hex driver that can fit most of your existing 1/4" bits. With a strong magnetic hold and no-roll handle design, this is one of the best all-in-one tools we have used! The shaft...

Xcelite Ergonomic Screwdriver Set (6pcs)
OOD!
Price: $88.54
View
Availability: Back Order
Sparkfun Item #: TOL-14234 -

The Xcelite Ergonomic Screwdriver Set provides six different screwdrivers, each featuring a shockproof ergonomic soft inner core and handle. Utilizing Xcelite's own Ergonic® handles, each screwdriver in this set conforms to your hand to provide great comfort and reduce torque loss to provide you with a fantastic slip-resistant tool! The set includes two Phillips head and four flathead screwdrivers. The screwdrivers in this set have been equipped with durable, satin-finished chrome molybdenum...

XLR-3 Cable - 10ft
OOD!
Price: $17.64
View
Availability: Back Order
Sparkfun Item #: CAB-15309 -

This is a 10 foot (~3m) long XLR-3 cable capable of better communications for lighting and special effects through standard or digital communication protocols. We specifically like to use this cable with our ESP32 Thing Plus DMX to LED Shield but it can also be used with DMX fixtures that utilize an XLR-3 jack. This cable possesses a 24AWG diameter and is terminated with a 3-pin male XLR connector at one end and a 3-pin female XLR connector at the other. Note: The usage of 3-pin XLR connectors...

XLR-3 Cable - 25ft
OOD!
Price: $35.36
View
Availability: Back Order
Sparkfun Item #: CAB-15310 -

This is a 25 foot (~7.6m) long XLR-3 cable capable of better communications for lighting and special effects through standard or digital communication protocols. We specifically like to use this cable with our ESP32 Thing Plus DMX to LED Shield but it can also be used with DMX fixtures that utilize an XLR-3 jack. This cable possesses a 24AWG diameter and is terminated with a 3-pin male XLR connector at one end and a 3-pin female XLR connector at the other. Note: The usage of 3-pin XLR...

XLR-3 Cable - 5ft
OOD!
Price: $10.63
View
Availability: Back Order
Sparkfun Item #: CAB-15308 -

This is a 5 foot (~1.5m) long XLR-3 cable capable of better communications for lighting and special effects through standard or digital communication protocols. We specifically like to use this cable with our ESP32 Thing Plus DMX to LED Shield but it can also be used with DMX fixtures that utilize an XLR-3 jack. This cable possesses a 24AWG diameter and is terminated with a 3-pin male XLR connector at one end and a 3-pin female XLR connector at the other. Note: The usage of 3-pin XLR...

XSP - Arduino Programmer
OOD!
Price: $26.72
View
Availability: Back Order
DFRobot Item #: DFR0360 -

XSP Programmer is designed for Arduino/AVR device. It is a driver free programmer, supporting Arduino/AVR ISP and FTDI programming. It could provide both 5V and 3.3V power output or self-adaption power output(OFF mode). Support Xbee socket and auto-match ISP clock frequency. With this programmer, you can adjust its interface for your own device. Quite convenient and easy to use. It will be your good friend, when you coding and programming. It could work with eClip programming Fixture together....

XT60 Connectors - Male/Female Pair
OOD!
Price: $2.66
View
Availability: Back Order
Sparkfun Item #: PRT-10474 -

These connectors are made from high-temp nylon with gold-plated spring pins or sockets molded in. The shape of this generic XT60 prevents reverse polarity, and when plugged in the connection is super-solid. Perfect for applications up to 65A continuous draw. Sold in pairs of 1 male and 1 female connector. Documents: Dimensional Drawing

YARD Stick One - USB Wireless Transceiver
Price: $219.35
View
Availability: Out of Stock
Sparkfun Item #: WRL-14777 -

The YARD Stick One (Yet Another Radio Dongle) is a palm-sized, low-speed USB wireless transceiver (similar to a Software Defined Radio or SDR) from Great Scott Gadgets that can transmit or receive digital wireless signals at frequencies below 1GHz. It uses the same radio circuit as the popular IM-Me. The radio functions that are possible by customizing IM-Me firmware are now at your fingertips when you attach YARD Stick One to a computer via USB. With official operating frequencies of...

Yun Shield(WiFi, Ethernet, USB, All-in-one Shield)
Price: $59.66
View
Availability: Stocked-NoBackOrder
Elecrow Item #: EL-AS99260YS -

Yun Shield(WiFi, Ethernet, USB, All-in-one Shield)Description: Yun Shield is designed to solve the Internet connectivity and storage issue for the Arduino Board. Like the Arduino Yun, it provides a Linux system, WiFi, Ethernet to the Arduino board for connectivity. It is fully compatible with Arduino IDE v1.5.4 or later. The Yun Shield is the ideal choice for Arduino Projects which require various internet connections and more storage. The Yun Shield is more flexible because it can work...

ZIF Socket 28-Pin 0.3"
OOD!
Price: $5.32
View
Availability: Back Order
Sparkfun Item #: PRT-09175 -

This is a high-quality, easy to use 28 pin ZIF socket that is 0.3" wide. Makes for easy connecting or programming to DIP ICs. Uses high conductivity terminals create solid connections. Can also be used for smaller pin packages. Good thing there's a patent on it!

Zio 16 Servo Controller (Qwiic)
OOD!
Price: $17.64
View
Availability: Back Order
Sparkfun Item #: ROB-16773 -

With the Zio 16-Channel 12 bit PWM controller, using the PCA9685 from NXP Semiconductors, you can control up to 16 servos or other PWM-controllable components using I2C. Each output can be off or on (no PWM control), or set any channel to its own PWM frequency and duty cycle. The PCA9685 operates with a supply voltage range of 2.3v to 5.5v and both the inputs and outputs are 5.5v tolerant. Servos can be connected directly to output pins (up to 25 mA, 5.5v) or controlled with external drivers...

Zio Current and Voltage Sensor - INA219 (Qwiic)
OOD!
Price: $16.36
View
Availability: Back Order
Sparkfun Item #: SEN-15176 -

The Zio Current and Voltage Sensor is a highly accurate current and power monitor. Utilizing the INA219, it's able to read DC current and power over I2C with up to 1% precision. This is a great fit for a variety of applications, including estimating battery life, tracking solar power generation, or monitoring electricity consumption. This sensor can measure voltage up to 26VDC and current up to 3.2A. The I2C interface makes it easy to daisy chain multiple devices and receive data via the Qwiic...

Zio Qwiic Loudness Sensor
OOD!
Price: $17.64
View
Availability: Back Order
Sparkfun Item #: SEN-15892 -

The Zio Qwiic Loudness Sensor is an I2C device making it easy to measure the noise level in your next project. No soldering required. The Loudness sensor can output ADC value (0-1023) to tell you the level of the noise. Also you can use this ADC value in other projects, like a sound sensor. The loudness value strongly depends on the distance between the sound source and the sensor. The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make...

Zio Qwiic OLED Display (1.5inch, 128x128)
OOD!
Price: $36.87
View
Availability: Back Order
Sparkfun Item #: LCD-15890 -

Here is the Zio Qwiic 1.5inch 128 x 128 pixels OLED display module. It can display a maximum of 16 lines of text content, and display pictures and animation on its 1.5-inch display. On the backside, there are two Qwiic connectors. With the Qwiic connect system no soldering is required to connect it to the rest of your system. Fit for use in small embedded systems, and also suitable for any projects that require displays of any kind, this screen is a must-have for Makers to include in even as...

Zio Ultrasonic Distance Sensor - HC-SR04 (Qwiic)
Price: $28.80
View
Availability: Out of Stock
Sparkfun Item #: SEN-15171 -

You may be familiar with the classic HC-SR04 distance sensor, it is great for providing non-contact distance readings from 2cm to 400cm. This board improves on the classic by adding a Qwiic connector to it, so now you can communicate over I2C. If you prefer to bypass the Qwiic connector and I2 you can also access the Trigger and Echo pins which are broken out on the edge of the board. The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make...

Znter 9V 400mAh USB Rechargeable LiPoly Battery
Price: $19.92
View
Availability: Out of Stock
HobbyKing Item #: MK-897000001-0 -

Introducing the revolutionary new rechargeable battery! the Znter range of batteries are Li-polymer batteries with a difference! The batteries can be charged via a USB cable anywhere, anytime no special charger is required. Simply plug the micro USB cable into the battery and find your nearest available USB port to charge! With over 15 billion Alkaline batteries made and thrown away each year wasting resources, C02 and creating toxic Landfill sites the Znter rechargeable batteries offers an...

Zumo Chassis Kit (No Motors)
Price: $17.25
View
Availability: Stocked
MK-Misc Item #: Pololu1418 -

The Pololu Zumo chassis is a small, tracked robot platform that is less than 10 cm on each side, allowing it to qualify for Mini Sumo competitions. The main body is composed of black ABS and features a compartment for four AA batteries and sockets for two micro metal gearmotors. It ships as a kit with two silicone tracks, two drive and two idler sprockets, a 1/16″ acrylic mounting plate, and mounting hardware. (Motors and batteries are not included.)This is a clearance item. Further details...

ZX Distance and Gesture Sensor
Price: $44.22
View
Availability: Out of Stock
Sparkfun Item #: SEN-13162 -

The ZX Distance and Gesture Sensor is a touchless sensor that is capable of looking for simple gestures. Developed in conjunction with XYZ Interactive, the sensor uses their GestureSense® technology to recognize the distance of an object away from the sensor up to about 12 inches (30cm, referred to as the “Z” axis) and the location of the object from side to side across the sensor in about a 6-inch (15cm) span, referred to as the “X” axis. You will be able to use I2C or UART to communicate...

Raspberry Pi 3 A+
Price: $67.60
View
Availability: Stocked
Sparkfun Item #: DEV-15139 -

How does a more compact and more economic Raspberry Pi sound to you? The Raspberry Pi 3 A+ is here and, like the Raspberry Pi 3 Model B+, it boasts a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, and Bluetooth 4.2/BLE. The RPi3 A+ is still equipped with the same 64-bit processor as the B+ version but has removed the Ethernet connector and three of the USB ports (leaving you with just one). It still also has the same 2x20 GPIO header and CSI/DSI...

Raspberry Pi 4 Model B (2 GB)
Price: $90.00
View
Availability: Stocked
Sparkfun Item #: DEV-15446 -

In the next iteration of the Model B line, Raspberry Pi has given us the very powerful Model B 4 with the goal of the credit card sized development platform becoming a full desktop experience. The 2GB DDR4 RAM version of this board has the ability to run two 4k monitors at once via two micro HDMI ports and features the long-asked-for, true Gigabit Ethernet. This creates a much higher-performing multimedia experience with the new Pi! In addition to two USB2 ports, the Raspberry Pi 4 also has...

Raspberry Pi 4 Model B (4 GB)
Price: $135.31
View
Availability: Back Order
Sparkfun Item #: DEV-15447 -

In the next iteration of the Model B line, Raspberry Pi has given us the very powerful Model B 4 with the goal of the credit card sized development platform becoming a full desktop experience. The 4GB DDR4 RAM version of this board has the ability to run two 4k monitors at once via two micro HDMI ports and features the long-asked-for, true Gigabit Ethernet. This creates a much higher-performing multimedia experience with the new Pi! In addition to two USB2 ports, the Raspberry Pi 4 also has...